engine dyno?
- Thread starter mike93lx
- Start date
87foxstang
Member
Look into XX tuning. They do some great work. I have countless friends that swear by them and say nothing but great things. They are located in east hartford, CT.
Their prices are reasonable, just give them a call and tell them what you want and they'll give you a price.
http://www.xxtuning.com/xxdirections.htm
I just realized your from MA. Im not familiar with any MA shops, but if your close to CT look into them.
Their prices are reasonable, just give them a call and tell them what you want and they'll give you a price.
http://www.xxtuning.com/xxdirections.htm
I just realized your from MA. Im not familiar with any MA shops, but if your close to CT look into them.
crgagner
New Member
The Dyno's they list are Chassis Dyno's for RWHP. I think he is looking for an engine dyno, I dont know of any myself. If chassis dyno will work he can always check out MPE Racing in Whitman MA. http://mperacing.com
L8R Craig
L8R Craig
87foxstang
Member
If you are looking to dyno a carbureted engine I can help you out. Check out my web site www.powerhousemachine.net or give me a call at 508-328-9884. My shop is in East Taunton. Pricing can vary depending upon exactly what you are looking to do. To run it in and tune the carb and timing is about $500. If you want to change cams, intakes,etc. it will be higher. Let me know if your interested. Thanks, Andy
hey guys, thanks for the feedback.
My car has been run on and tuned at the dyno at NE Dyno by Eric Laferriere and I'll go back there for any chassis dyno testing and tuning, but I'm going to have my motor out this winter to change heads and cam and wanted to see what it'll make before putting it back in the car in case I wanted to make any more changes over the winter.
powerhouse, thanks for the offer, but it's a fuel injected motor and I don't want to change it over just for this testing.
I will likely be in contact for a 460 build up that a buddy of mine and I are doing for his notch though. that will be carbed.
My car has been run on and tuned at the dyno at NE Dyno by Eric Laferriere and I'll go back there for any chassis dyno testing and tuning, but I'm going to have my motor out this winter to change heads and cam and wanted to see what it'll make before putting it back in the car in case I wanted to make any more changes over the winter.
powerhouse, thanks for the offer, but it's a fuel injected motor and I don't want to change it over just for this testing.
I will likely be in contact for a 460 build up that a buddy of mine and I are doing for his notch though. that will be carbed.
Zero_chance
Founding Member
If youre close enough to Douglas to go to NE Dyno, Charlton Performance is only 15 minutes from there and they have an engine dyno in house.
Similar threads
