94stangfan Member Feb 23, 2003 290 2 19 Indianapolis, IN Mar 4, 2004 #1 Mar 4, 2004 #1 All, I had an oil pump go on my engine, so I bought a used one from a junk yard. The engine looks rebuilt. After installing and starting, I found I have a miss-fire on Cyl 3. Does anyone have any idea what would cause this? Thanks, Keith
All, I had an oil pump go on my engine, so I bought a used one from a junk yard. The engine looks rebuilt. After installing and starting, I found I have a miss-fire on Cyl 3. Does anyone have any idea what would cause this? Thanks, Keith
94stangfan Member Feb 23, 2003 290 2 19 Indianapolis, IN Mar 4, 2004 #2 Mar 4, 2004 #2 One thing I forgot to mention is that I do have the Check Engine Light on. I read the code and it is a P0303. Which says Cyl 3 is misfiring.
One thing I forgot to mention is that I do have the Check Engine Light on. I read the code and it is a P0303. Which says Cyl 3 is misfiring.
dastang2 Active Member Dec 11, 2003 2,020 0 46 tx Mar 4, 2004 #3 Mar 4, 2004 #3 try switching a known good spark plug in 3 and see what happens. do a compression test too.
94stangfan Member Feb 23, 2003 290 2 19 Indianapolis, IN Mar 5, 2004 #4 Mar 5, 2004 #4 It was an ID10T Error... I had to replace my fuel rails when putting the new engine in. I must have accidently unplugged that injector. That was my problem. Problem Solved.... Thanks, Keith
It was an ID10T Error... I had to replace my fuel rails when putting the new engine in. I must have accidently unplugged that injector. That was my problem. Problem Solved.... Thanks, Keith