Engine rebuild kit ok?

88GTMustang

New Member

Oct 31, 2003

247

0

0

LA california

Dec 28, 2003

#1

• Dec 28, 2003

• #1

Thinking about rebuilding my 302 in my 88 GT and i was looking through summit today and checking out the rebuild kits.basically what i want to know is this a good kit, it is a SEALED POWER SPEED PRO FEL-PRO kit and i was going to get the Hypereutectic with an Compression of 9.08:1 for 269$$$ anyone use this?? good, bad what??

 

88GTMustang

New Member

Oct 31, 2003

247

0

0

LA california

Dec 29, 2003

#2

• Dec 29, 2003

• #2

Anybody????????

 

Luvmy88

New Member

Oct 27, 2003

136

0

0

Dec 29, 2003

#3

• Dec 29, 2003

• #3

I too am curious. My 302 is becoming a 306 as I type this, and was thinking of going with the more expensive $459 kit becasue of the forged pistons.

If you plan on super-charging, or using NOS you may want to consider the forged kit.

What cam are you going to use? Sre you still using speed density?

 

SuperchargedB87

Founding Member

Oct 25, 2002

485

0

0

New Jersey

Dec 29, 2003

#4

• Dec 29, 2003

• #4

I personally never used it, but just to let you know its like a stock rebuild. The only difference is the stock pistons are forged.

 

88GTMustang

New Member

Oct 31, 2003

247

0

0

LA california

Dec 29, 2003

#5

• Dec 29, 2003

• #5

I dont plan on on using NOS or a supercharger, I am going to use just the stock cam, Yes the car is still speed density. The only mods i plan on doing are CAI, Removing the A/C, Exhaust, 3.73's, and maybe pullies.

That should be fine for my plans right???

 

SuperchargedB87

Founding Member

Oct 25, 2002

485

0

0

New Jersey

Dec 29, 2003

#6

• Dec 29, 2003

• #6

Its not the best kit out, but for just refreshing the motor in which you only plan to throw a few bolts ons onto, it should work just fine.