Engine shut off after fast changing positions

Slow5.0

Active Member

Feb 13, 2003

2,554

0

46

Portland, OR

Jun 4, 2005

#1

• Jun 4, 2005

• #1

Engine shut off after fast changing positions on TwEECer

I happens twice in last two weeks, i was cruising and i was tryin switch from position 4 to 1 on my Tweecer and engine start shaking ,missfiring ,than i press clutch and it dies, looks like in that time fuel pump stoped working,then i turn ken off,than on ,start engine and everything was fine


I was wandering is this ever happen to any of you guys

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jun 4, 2005

#2

• Jun 4, 2005

• #2

Ernan, what do you mean about switching positions?

Have you pulled codes yet? The CEL does not need to be on for a code to be stored. If you find a secondary fuel code, that suggests the Fuel pump did or does lose power intermittantly.

Good luck with it Ernan.

 

CManT1914

New Member

Feb 5, 2004

3,172

2

0

Killeen, Texas

Jun 4, 2005

#3

• Jun 4, 2005

• #3

HISSIN50 said:

Ernan, what do you mean about switching positions?

Have you pulled codes yet? The CEL does not need to be on for a code to be stored. If you find a secondary fuel code, that suggests the Fuel pump did or does lose power intermittantly.

Good luck with it Ernan.

Click to expand...

my friend had a code a while back that said something like secondary fuel pump circuit loss or something like that, and we thought nothing of it. Lately he's been having big power loss problems. It must be related.

Ernan, definitely pull the codes. I seem to remember you saying a few weeks ago that you don't have a code reader. Now would be a good time to invest in one. Good luck bro, let us know what else you find out.

 

Slow5.0

Active Member

Feb 13, 2003

2,554

0

46

Portland, OR

Jun 4, 2005

#4

• Jun 4, 2005

• #4

Sorry guys ,i posted same post on http://tweecer.oplnk.net and i just copy whole thing here, but i forget to add that i use TwEECer R/T

And thats positions on Tweecer

 

WhiteDevil

New Member

Feb 4, 2003

2,717

0

0

San Diego

Jun 4, 2005

#5

• Jun 4, 2005

• #5

Not sure i usually put the two that im going to switch between next to each other so tha ti dont have to go over a few, so im not sure.

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Jun 4, 2005

#6

• Jun 4, 2005

• #6

I've never tried to switch from anything other than the next position and sometimes the car runs a bit rough for a short while.

Then again I usually just put the newest file on the same switch position, lol.

Guess I'm not a lotta help on this one Ernan.

Later
Grady