• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

excessive distributor shaft play, msd distributor

  • Thread starter Thread starter DarkoStoj
  • Start date Start date Sep 5, 2008

DarkoStoj

Founding Member
Sep 4, 2002
929
13
39
Detroit
Sep 5, 2008
#1
  • Sep 5, 2008
  • #1
well after a long and terrible hunt down for my misfire problem I found it to be the distributor shaft has way too much backlash(excessive play when you move the distributor shaft to the left and right). This has caused all kinds of misfires, headaches, and whenever i would put a timing light on it i couldnt set the total timing because the light was all over the place giving me a reading between 30* and 40*.

I guess now that I found the problem I need to figure out how to fix it. I looked at the cam gear and dist gear and they both look fine. Its a F303 cam and a msd large cap distributor. The motor is fairly new and the distributor looks brand new inside and out.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 5, 2008
#2
  • Sep 5, 2008
  • #2
FWIW, the timing can jump quite a bit when you check it with the SPOUT connector in place.

How much was your timing jumping when you checked it with the SPOUT connector removed? It should have been pretty rock solid.
 

DarkoStoj

Founding Member
Sep 4, 2002
929
13
39
Detroit
Sep 5, 2008
#3
  • Sep 5, 2008
  • #3
HISSIN50 said:
FWIW, the timing can jump quite a bit when you check it with the SPOUT connector in place.

How much was your timing jumping when you checked it with the SPOUT connector removed? It should have been pretty rock solid.
Click to expand...
i dont know what a spout connector is. This is on a 302HO motor thats carbed in a 65 mustang fastback.

well...i looked up the part # of the msd dist and it came with an iron gear. I ordered a steel replacement and am hoping the iron gear wore down which caused the slop in the distributor.
 
You must log in or register to reply here.

Similar threads

Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
479
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Engine 86-93 V8 Distributor Collar Differences
  • AeroCoupe
  • Feb 15, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
1K
Fox 5.0 Mustang Tech Mar 9, 2025
AeroCoupe
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
703
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
552
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?