• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Exhaust hanging crooked

  • Thread starter Thread starter CivicEater
  • Start date Start date Mar 24, 2004
C

CivicEater

New Member
Jan 29, 2004
579
0
0
Mar 24, 2004
#1
  • Mar 24, 2004
  • #1
The pass side exhaust hangs a good inch and a half lower then the drivers....I checked the hangers and they both seem to be about the same position but when I try to push up the pass side it springs back down.......bad hanger? the drivers does the same thing kinda but it hangs on its own about and incha dn ahalf higher...(perfect hight)
 

Rel

Founding Member
Aug 7, 2002
344
0
0
Los Angeles, California
Mar 24, 2004
#2
  • Mar 24, 2004
  • #2
Play around with your muffler too. It could be pointing down slightly so the tailpipe is coming back at an angle. Angling and rotating it differently?
 

AznStanger3v

Active Member
Aug 11, 2003
2,026
0
47
Northern VA
Mar 24, 2004
#3
  • Mar 24, 2004
  • #3
go to your local parts store and pay $5 on some hangers. i think those hangers are just old.
 
C

CivicEater

New Member
Jan 29, 2004
579
0
0
Mar 24, 2004
#4
  • Mar 24, 2004
  • #4
I woud go drop a five on a new hanger but they look annoying to get off...rusted in.....mabye I will have too....I tried messing with the mufflers but they seemed on point...I was messing with everything today for like an hour and it just kept looking worse and worse...
also the hanger seems to twist (the rubber part) rather than move....dont know if that means anything
 

1105

I AM the random post master...bow down
May 3, 2003
3,841
0
0
Daytona Bch, FL
Mar 25, 2004
#5
  • Mar 25, 2004
  • #5
the hangers aren't that bad to get off. Spray some lube of some kind on them, let it soak for a few min, then they should slide off fairly easily after that. Thats what I did for the exhaust hangers, but the top part might be harder.
 
You must log in or register to reply here.

Similar threads

A
95 Gt intermittent backfire
  • A_A_Ron
  • May 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
426
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 26, 2025
A_A_Ron
A
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
701
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
V
pushrod 5.0 (MILD/ Torque) turbo build for an old scout II help
  • vz58
  • Apr 21, 2024
  • Other Auto Tech
Replies
11
Views
2K
Other Auto Tech Jan 21, 2026
Flyboy60
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?