• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

exhaust leak

  • Thread starter Thread starter 95mustang_gt
  • Start date Start date Mar 13, 2006
9

95mustang_gt

New Member
Mar 30, 2005
364
1
0
Wisconsin
Mar 13, 2006
#1
  • Mar 13, 2006
  • #1
i cant find the exhuast leak.i took everything apart from tailpipes to midpipe and check my headers bolts.I made sure i all the bolts were on tight.then I took the car for a ride and still hear that annyoning exhaust leak .What else can cause a exhaust leak?i try to find it by covering the tailpipes with rags and then reving it up and cant hear it.

thanks
Jesse
 

91LX_5L

Founding Member
May 13, 2002
1,943
0
36
British Columbia
Mar 14, 2006
#2
  • Mar 14, 2006
  • #2
Okay. More then likely the leak is either your headers or where the H pipe connects to the headers. Did you use the gaskets that were supplied with the mac headers to install them? If so I wouldnt dobut if your header gaskets are shot.

You can try to find a metal rod about 1.5 feet, use it to transmit the noise, place it on a suspect area and put your ear to the other end it will help.

Also you wont beable to hear a exhaust leak when revving the motor best way to pinpoint it is to go on the highway get it in top gear then very slightly get on the gas, you should hear it then. If it sounds like its comming from your dash area its prob the headers/gaskets, if it sounds like its comming from around your feet or below you its the connection between the headers and your H pipe.

good luck.
 
9

95mustang_gt

New Member
Mar 30, 2005
364
1
0
Wisconsin
Mar 14, 2006
#3
  • Mar 14, 2006
  • #3
i did take it o the hwy yesterday and it always sounds like its coming from the dash area.Will i have to take the header off to put a new gasket on?What is a good gasket to use?

thanks
Jesse
 
E

eufo

New Member
Feb 18, 2006
22
0
0
Miami, FL
Mar 14, 2006
#4
  • Mar 14, 2006
  • #4
exhaust leaks SUCK... i still have one either at the header/head connection or the header/h-pipe connection...

the header will have to be removed to replace its gasket... supposedly the ford racing copper gasket is a good one... but i have those and wonder if they are leaking
 

91LX_5L

Founding Member
May 13, 2002
1,943
0
36
British Columbia
Mar 14, 2006
#5
  • Mar 14, 2006
  • #5
I would use a Felpro gasket, or i find the best is OEM ford gaskets they can be reused and are nice, stay away from the paper gaskets. Good luck. Try to make sure its the headers tho before you take them apart.
 

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Mar 14, 2006
#6
  • Mar 14, 2006
  • #6
I had this problem..turned out to be the smog pump tube that comes off the h-pipe. I patched it but it kept blowing out. Either way..check it.
 

91LX_5L

Founding Member
May 13, 2002
1,943
0
36
British Columbia
Mar 14, 2006
#7
  • Mar 14, 2006
  • #7
ah yes also if you have your smog there is a rubber tube that goes there by your headers, on your passenger side, I know mine got a hole in it from resting on the header. I forgot about that.
 
9

95mustang_gt

New Member
Mar 30, 2005
364
1
0
Wisconsin
Mar 14, 2006
#8
  • Mar 14, 2006
  • #8
well i read a post about the smog pump making noises,and last weekend i got a shorter belt to bypass that and the sound is still there.i will see if i can pin point sound tomorrow.

thanks
Jesse
 
You must log in or register to reply here.

Similar threads

M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
514
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Drivetrain Rear end clunk
  • seanmahoney
  • Oct 13, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
398
SN95 4.6L Mustang Tech Oct 13, 2025
nickyb
I
Engine Insane fuel trims +25% LTFT Bank 1, -16% LTFT Bank 2
  • imw_stl
  • Aug 31, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
277
SN95 4.6L Mustang Tech Sep 19, 2025
Mustang5L5
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
15
Views
459
SN95 V6 Mustang Tech Sunday at 1:36 PM
joeybuddy96
J
Can a vacuum leak be caused by lower intake install
  • Creomod
  • Mar 30, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 5, 2024
revhead347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?