• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Fan Control Unit Wiring Help

  • Thread starter Thread starter norcalsvt
  • Start date Start date Nov 13, 2004
N

norcalsvt

Member
May 4, 2004
88
0
6
San Francisco,CA
Nov 13, 2004
#1
  • Nov 13, 2004
  • #1
Was at the Goodguys car show today & came across an adjustable thermostat for the spal fan I have. Right now I have it hooked up with a manual switch & relay setup. The fan control unit I bought has only 3 connections 1 for the fan motor,1 for 12volts & the other I don't know what it means. It says the last wire goes to the compressor coil. Can anyone help me out with that. I assumed there would be some sort of ground & thats what this wire is for, but I'm not sure.
 
J

jmlay71

20+ Year Stangneter
Jul 16, 2003
67
1
9
Nov 13, 2004
#2
  • Nov 13, 2004
  • #2
The one labled to the compressor coil is so that it will turn on with the AC compressor. You could also hook a relay & temp sensor up so that it will automatically turn on & off.

Mike
 
3

351carlo

New Member
Mar 9, 2004
267
0
0
Philadelphia
Nov 13, 2004
#3
  • Nov 13, 2004
  • #3
I'm not sure if you're into buying something else....

I have a Hayden model that controls both of my electric fans. It's got a built in thermostat with a temp probe that you push into the radiator. When it hits anywhere from 160-195 (depending on where you set it), the fans will both come on. It also uses the A/C Clutch turn on. Like I said it powers both fans with the same thermostat, so it was the clear option for me.
 
N

norcalsvt

Member
May 4, 2004
88
0
6
San Francisco,CA
Nov 14, 2004
#4
  • Nov 14, 2004
  • #4
jmlay71 said:
The one labled to the compressor coil is so that it will turn on with the AC compressor. You could also hook a relay & temp sensor up so that it will automatically turn on & off.

Mike
Click to expand...
Thanks for the tip on the compressor coil.

This unit is actually supposed to turn on/off at whatever I set it at. How I have it now is a Bosch relay & a toggle switch. I'm going to leave the switch & relay in & try to wire the fan control unit to the relay. Im going to set it to turn the fan on around 195 & off at 180. Only thing I can't figure out is if I need another relay. Right now I have the toggle hooked up to 87 of the relay, thats where I'm supposed to wire the fan control unit to. I see on the relay there is a 87A, Im not sure if it's possible to wire it up to there?
 
You must log in or register to reply here.

Similar threads

S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
S
Resolved Electric fans
  • Serg.Xof
  • Jul 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
402
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 22, 2025
AeroCoupe
D
6G alternator pigtail wiring help needed
  • Dogman_1969
  • Aug 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
448
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 11, 2025
Dogman_1969
D
Electrical Key on power for Fan relay
  • Nine Finger Wrenching
  • Jan 14, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
557
Fox 5.0 Mustang Tech Jan 20, 2025
Nine Finger Wrenching
1999 Mustang GT - No Start- Need help understanding the fuel pump circuit and how it works
  • 99gtGuy
  • Nov 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
573
1996 - 2004 SN95 Mustang -General/Talk- Nov 7, 2025
04newedge-
0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?