I'm getting ready to strip the 88 GT I have, and set the motor up with a carb. For all of you who have converted a 5.0 EFI to a carb, what has been your favorite Aluminum intake manifold and carb?
Weiand Stealth is a good manifold. If you go Edelbrock I would spend the extra cash for the air gap, but if you're wanting to save a few dollars look into Professional Product's Crosswind intakes. Their EFI manifold outpowered the Twisted Flow counterpart in a MM&FF shootout if memory serves.
ebaymotors.com for one for a 351W. Or try Mustangs of Oklahoma ( think that's the right name) I was in their store a couple years ago and saw they had a couple of these on the shelf for the 351W. They're a little high on they're pricing but they have some good stuff in there.
On my old Mustang, I had an older "Torker", and a crane Fireball came, equivalent to the BOSS 302 specs. Bottom end was weak, but above 3000 RPM, hang on!!
Looking for something similar, but with operating range a bit lower