• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Fox Fender to door alignment?

  • Thread starter Thread starter 91GTstroked
  • Start date Start date Feb 16, 2022

91GTstroked

15 Year Member
Jun 14, 2007
510
284
93
Feb 16, 2022
#1
  • Feb 16, 2022
  • #1
This seems to be a common thing. Even my 03 cobra has this problem on the passenger side.

My 93 hatch drivers side fender sits out probably less than 1/8" from the door. I'd like it to be flush.

How do I fix this? I can get a picture of it later tonight.

Thanks.
 

Mstng93SSP

You have a nice rear end there Dave.
15 Year Member
Nov 29, 1999
2,993
3,500
184
Mililani, Hawaii
Feb 16, 2022
#2
  • Feb 16, 2022
  • #2
It is usually because someone at some point jacked the car up on the pinch weld where the bottom of the fender bolts on and bent it. Straighten the pinch weld back out and the fender will pull back into alignment with the door.
 
Reactions: Shakerhood, manicmechanic007, 91GTstroked and 1 other person

91GTstroked

15 Year Member
Jun 14, 2007
510
284
93
Feb 17, 2022
#3
  • Feb 17, 2022
  • #3
Mstng93SSP said:
It is usually because someone at some point jacked the car up on the pinch weld where the bottom of the fender bolts on and bent it. Straighten the pinch weld back out and the fender will pull back into alignment with the door.
Click to expand...
That's what I've heard. I'll double check, but it looked straight to me.
 

Attachments

  • IMG_20220217_022724689.webp
    338.8 KB · Views: 210
E

ebone84

20+ Year Stangneter
Jun 8, 2004
125
40
39
Feb 17, 2022
#4
  • Feb 17, 2022
  • #4
It could be like that from the factory to keep down the wind noise
 

HotFox

15 Year Member
Jan 5, 2009
1,062
682
164
SE Michigan
Feb 17, 2022
#5
  • Feb 17, 2022
  • #5
Bend the fender brackets so the suck it in just a smidgen or add a shim under your door hinges.
 

manicmechanic007

5 Year Member
Sep 26, 2017
2,544
719
143
Roy, Utah
Feb 17, 2022
#6
  • Feb 17, 2022
  • #6
I usually just take some big channel locks and bend the pinch welds back straight and that straightens the fender out
So common you would not believe Someone told my buddy with the heavy Cadillac it was normal and for airflow
Good answer if you do not want to mess with it
 
Reactions: 91GTstroked

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,015
10,641
213
polk county florida
Feb 17, 2022
#7
  • Feb 17, 2022
  • #7
Need more pics to form an opinion here but it looks like the top of the fender needs pushing in at the windshield post just a smidge, hard to tell.
 
Reactions: 91GTstroked

91GTstroked

15 Year Member
Jun 14, 2007
510
284
93
Feb 17, 2022
#8
  • Feb 17, 2022
  • #8
General karthief said:
Need more pics to form an opinion here but it looks like the top of the fender needs pushing in at the windshield post just a smidge, hard to tell.
Click to expand...
I'll have to get better pictures tonight. Basically same angle as first picture.
 

Attachments

  • IMG_20220217_022715201.webp
    338 KB · Views: 199

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,015
10,641
213
polk county florida
Feb 17, 2022
#9
  • Feb 17, 2022
  • #9
Not better pics, different angles like straight on, down from the top showing the gap at the windshield post.
 
Reactions: 91GTstroked

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,359
209
114
Ohio
Feb 17, 2022
#10
  • Feb 17, 2022
  • #10
Bad jack placement over the years causes that problem.
 

91GTstroked

15 Year Member
Jun 14, 2007
510
284
93
Feb 18, 2022
#11
  • Feb 18, 2022
  • #11
General karthief said:
Not better pics, different angles like straight on, down from the top showing the gap at the windshield post.
Click to expand...
I'll try to get some.
 
You must log in or register to reply here.

Similar threads

L
Door pull panels, convertible versus coupe
  • lenzgt
  • Jun 25, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
139
1994 - 1995 Specific Tech Jun 25, 2026
lenzgt
L
K
Door post and rust repair
  • Kleinjj27
  • Aug 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
268
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 8, 2026
Kleinjj27
K
Fender Well Easter Eggs
  • 85GT4V
  • May 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
226
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 18, 2025
85GT4V
B
Tire size question 1986 gt hatchback
  • B0udreaux
  • Jan 12, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
688
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 17, 2026
B0udreaux
B
A
Engine 302 oil leak when in gear but fine at idle
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
Replies
3
Views
97
Classic Mustang Specific Tech Saturday at 8:58 PM
AlexM556
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?