~Few Pics From Todays Detail~

04sleeper · Jan 24, 2010

Well, it was about time for a little paint care. Had a few swirls I wanted to remove so out came the PC and supplies.

Figured I would share some pics.

Products used: SSR1, Red Moose Machine Glaze, Clearkote Carnauba Moose Wax.

During the SSR1

Wax Applied.

Results.

Should be good for a while now.

Kornnut · Jan 24, 2010

Looks amazing. Can you come over to Fort worth and do mine?

BurningRubber · Jan 24, 2010

I'd probably cry if my car looked that good after a detail.

03 Mustang gT · Jan 24, 2010

hada get that out of my system. as always looks amazing

98COBRA281 · Jan 24, 2010

you had swirls? i dont know if i believe that...lol

Tim2002GT · Jan 25, 2010

98COBRA281 said:
you had swirls? i dont know if i believe that...lol

no kidding!

D-BOI · Jan 25, 2010

i know you just mentioned what products you used but can you please specify and where can i get them and what wheel did you use or did you do it by hand? sorry if my question sounds silly but the way ur car looks is jawdropping man wow

SteedaGT9150 · Jan 25, 2010

Dragstr05 · Jan 25, 2010

Can we have an 04 sleeper photo thread sticky??

Pictures of this car NEVER get old. Big props to you, looks awesome!

fiveoho · Jan 25, 2010

car looks awesome.

curious, whats your front wheel size and front tire size?

04sleeper · Jan 25, 2010

Kornnut said:
Looks amazing. Can you come over to Fort worth and do mine?

Sure! LOL.. Thanks.

BurningRubber said:
I'd probably cry if my car looked that good after a detail.

LOL. Never heard that one before. Thanks.

03 Mustang gT said:
hada get that out of my system. as always looks amazing

Thanks.

98COBRA281 said:
you had swirls? i dont know if i believe that...lol

Tim2002GT said:
no kidding!

Well, I had a few so they had to go! LOL...

D-BOI said:
i know you just mentioned what products you used but can you please specify and where can i get them and what wheel did you use or did you do it by hand? sorry if my question sounds silly but the way ur car looks is jawdropping man wow

I bought my supplies from Scott @ Specialty Motoring Products. Specialty Motoring Products - Products for Well Loved Cars

I used the SSR1 on a white pad, and the Red Moose on a blue pad, and the wax by hand.

SteedaGT9150 said:

Dragstr05 said:
Can we have an 04 sleeper photo thread sticky??

Pictures of this car NEVER get old. Big props to you, looks awesome!

LOL. Thanks.

fiveoho said:
car looks awesome.

curious, whats your front wheel size and front tire size?

Thanks. My front wheels are 18X9 with 265-35-18's.

deftsound · Jan 25, 2010

Looks awesome! I can't wait to get home and do mine!

Kornnut said:
Looks amazing. Can you come over to Fort worth and do mine?

Where in fort worth are you from? I grew up in keller...

fiveoho · Jan 25, 2010

04sleeper said:
Thanks. My front wheels are 18X9 with 265-35-18's.

other than the car looking like a mirror, it has the perfect stance to it. was reading your cardomain page and i see that you used h&r springs in the back but you cut a coil off the stock front springs.

how does that coil off of the stock front springs compare to the eibach sportlines (2.0 front drop) in terms of stance? would your setup be lower in the front or the sportlines?

Kornnut · Jan 25, 2010

deftsound said:
Where in fort worth are you from? I grew up in keller...

I grew up in VA. I moved to Fort Worth last year. My wife is from Texas city and moved up to Dallas when she was young.

SRT Handz · Jan 25, 2010

Nice Job.

If i were you, i would look into a Higher End Carnuaba Top-Coat wax for your cobra.... Maybe a Swissvax or Rubbish Boys Original Edition wax.

04sleeper · Jan 26, 2010

fiveoho said:
other than the car looking like a mirror, it has the perfect stance to it. was reading your cardomain page and i see that you used h&r springs in the back but you cut a coil off the stock front springs.

how does that coil off of the stock front springs compare to the eibach sportlines (2.0 front drop) in terms of stance? would your setup be lower in the front or the sportlines?

I do not have any personal experience with the Sportlines, so I am not sure. I do know it is lower than the H&R Race Springs in the front.

SRT Handz said:
Nice Job.

If i were you, i would look into a Higher End Carnuaba Top-Coat wax for your cobra.... Maybe a Swissvax or Rubbish Boys Original Edition wax.

Thanks. I will be honest, I have been detailing cars for more than 20 years and I have never really seen any wax that blew me away more than others I have used.

I still like the 3M products actually. They have always worked well too.

HOOCBB · Feb 8, 2010

If you think this car looks good in pics...you should see it in person. I saw it up close this last weekend at Cars and Coffee in Plano (Dallas).

04 Sleeper, I think you were the one explaining to me that the 03/04 Cobras had the running pony emblem in the grille from the factory.

Sonic04GT · Feb 8, 2010

Come do mine when you're done with Kornnut? I'm only in Killeen

Looks amazing.

32ValveRom · Feb 9, 2010

Wow, now I'm thinking about whippin' out the PC for this weekend

WallyKilla · Feb 9, 2010

I highly recommend Poorboys work Black Hole Glaze before the wax or sealant! I use it on all my dark color cars and it really brings out red and black! BTW still looks flawless!

~Few Pics From Todays Detail~

04sleeper

Kornnut

BurningRubber

03 Mustang gT

New Member

98COBRA281

Tim2002GT

D-BOI

Member

SteedaGT9150

Advanced Member

Dragstr05

New Member

fiveoho

04sleeper

deftsound

Please ask me how much my supercharger cost

fiveoho

Kornnut

SRT Handz

I tripped & fell down and cut myself & got blood

04sleeper

HOOCBB

New Member

Sonic04GT

Member

32ValveRom

Member

WallyKilla

Member

Similar threads

~Few Pics From Todays Detail~

New Member

Member

Advanced Member

New Member

Please ask me how much my supercharger cost

I tripped & fell down and cut myself & got blood

New Member

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency