• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

first pass with my stang

  • Thread starter Thread starter race-a-holic
  • Start date Start date Aug 5, 2007
R

race-a-holic

New Member
Jul 31, 2007
8
0
0
Aug 5, 2007
#1
  • Aug 5, 2007
  • #1
I got the stang out to the local 1/8th mile track today,and it was hot.
Keep in mind my coupe is almost stock with an aod.
Only mods is a flowmaster exhaust,and I took off the airbox and put on a filter from my cold air kit.I'll be putting the rest of it on later.
I did a mild burnout.Once staged I revved it up slightly.I should have revved it up more,but I didn't know if I would smoke the tires.
I launched and it was like it just wouldn't rev.
It's like it hooked up and just didn't have the power.
It run a 10.51.
I only made one pass because I'm not trusting
the worn out motor mounts.
I think the stock gears are killing this thing.
Once your going,it seems just "ok".
 

foxmustangman

Member
Jun 20, 2007
196
1
16
Idaho
Aug 5, 2007
#2
  • Aug 5, 2007
  • #2
My first pass i ran a 9.995
My best yet is 9.756

Conv. Cold Air. Underdrive Pulley.
 

91 HATCH

Banned
May 17, 2007
262
0
0
illinois
Aug 6, 2007
#3
  • Aug 6, 2007
  • #3
my first pass was about 11.00

my best so far is a 9.46
 

onefstsnake

New Member
Nov 25, 2005
792
1
0
Northern VA
Aug 6, 2007
#4
  • Aug 6, 2007
  • #4
My first pass ever was a 9.2 and my best is an 8.8
I havent ran it since I put the TB and Intake on...

What was your 60' times?
I cut pretty consistant 1.90's which helps alot.
 

BigHairyMonkey

Founding Member
Jun 18, 2003
411
1
16
Houston (Bellaire) TX
Aug 6, 2007
#5
  • Aug 6, 2007
  • #5
my best pass is 8.96 @ 79.19mph. That was taken from my best 1/4 pass. mods in sig
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Aug 6, 2007
#6
  • Aug 6, 2007
  • #6
If all of you posting have 5-speeds, then this isn;t an equal comparison for him to compare to. A stock AOD car with stock gears is not the same as a 5-speed. The car feels like a dog out of the hole because it is, 2.41 1st gear coupled with stock rear gears is going to do that. The only way around this is to put a converter or gears, or both in the car!
 

blackened88lx

Active Member
Aug 9, 2006
0
4
28
Connecticut
Aug 6, 2007
#7
  • Aug 6, 2007
  • #7
Yep, gears and a t5, or gears and a converter if you must keep the slush box.
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Aug 6, 2007
#8
  • Aug 6, 2007
  • #8
i want a 5 speed..hell id settle for a ole 4 speed..( i like em )...what gears best for a DD fox vert with a auto? dont plan to put ANY money into the auto...its brand new..(whichs sucks) which gear be best? i kno wa 4.10 would be best for but what about 3.73's? is the car gonna have that much of a difference to 4.10's?

i plan to either A...put a T-5 in mine in a few years...
or plan B which im only doing i come across a equal value fox hatch 5 speed that a guy is looking to trade for a vert...

id rather go option A...there something about running 12's in a vert that sound cool to me :d.... maybe 11's
 
R

race-a-holic

New Member
Jul 31, 2007
8
0
0
Aug 6, 2007
#9
  • Aug 6, 2007
  • #9
The track I was at only tells the 1/8th mile time.
60 ft. time felt like 2 days.Good grief it was slow off the line.
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Aug 6, 2007
#10
  • Aug 6, 2007
  • #10
Keep working on it, even with an auto you should be able to get a 9.5 out of it.
 
R

race-a-holic

New Member
Jul 31, 2007
8
0
0
Aug 6, 2007
#11
  • Aug 6, 2007
  • #11
I think once I get all of the cold air kit on it,3.73's,shorty headers,and maybe some better tires it should go into the 9's.A good tune-up might do wonders too.

What do you guys think?
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Aug 6, 2007
#12
  • Aug 6, 2007
  • #12
The cold air kit isnt doing anything special.. The stock box with a K&n actually works better.. Unless its a fenderwell intake your just sucking hot air in..
 

foxmustangman

Member
Jun 20, 2007
196
1
16
Idaho
Aug 6, 2007
#13
  • Aug 6, 2007
  • #13
RsStanG1987 said:
The cold air kit isnt doing anything special.. The stock box with a K&n actually works better.. Unless its a fenderwell intake your just sucking hot air in..
Click to expand...

Yeah. That's why its called COLD AIR.

And i have and AOD with the second heaviest fox mustang. LX Vert.

though i did take out my back seat
 
You must log in or register to reply here.

Similar threads

B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
468
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
603
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
529
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
S
Block questions
  • s_vargas54
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 8, 2026
Trogdor
T
Resolved No run or idle
  • Thebluefox1
  • Oct 10, 2025
  • Fox 5.0 Mustang Tech
Replies
14
Views
658
Fox 5.0 Mustang Tech Nov 25, 2025
DadLife0724
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?