• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

First time at the track!

  • Thread starter Thread starter BennyBlown2v
  • Start date Start date Apr 28, 2006

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Apr 28, 2006
#1
  • Apr 28, 2006
  • #1
Just got home from IRP! I made my first pass, then they told me I needed a helmet, so a nice guy in a black cobra vert let me borrow his for the next run, but by the time I was finished with the second, it was way to busy to have to wait again to borrow somebodies helmet... I GOTTA BUY ME A HELMET!

Timeslip:


My first run was just that ~ my first run EVER! So I was pretty happy, though my 60ft sorta sucked. Both first and second runs I spun halfway through 2nd, 3rd, and barked hard when going into 4th... I figure I need me some nice wide drag radials to replace the skinny 245 GSd3's back there now! Second run was against a z28, I'm not sure if he shut down/let off early, or if I just pulled on him...I hope pulled on him lol

I'm pretty happy with my times, especially seeing as I have 350/575lb f/r springs - and everything setup for autocross. Perhaps some softer springs will go well with those new tires...
 

S281 #39B

New Member
Mar 29, 2006
31
0
0
South Carolina
Apr 28, 2006
#2
  • Apr 28, 2006
  • #2
Great job just keep driving it. It takes practice. Instead of using drag radials just practice and don't remove weight from the rear. It helps me to race with a full tank. The weakest link always breaks first.
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Apr 28, 2006
#3
  • Apr 28, 2006
  • #3
Eh? I was already slipping it out, and I was breaking traction while upshifting too (second run was better off the line but spun WAY more shifting). Skinny tires + ~370hp = spinnies! i'm really happy though, NO wheel hop at all with the IRS, was really happy

Also for full list of mods, click picture in sig!! :stangnet:
 

TweekedGT

New Member
Jul 22, 2004
1,274
0
0
Alberta
Apr 28, 2006
#4
  • Apr 28, 2006
  • #4
Great times . Glad you had fun! I can't believe they let you run even one run with that blower under there. Now your addicted like the rest of us .
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Apr 28, 2006
#5
  • Apr 28, 2006
  • #5
Super addicted! I've been giong to watch the races since I was a kid, and my dads friend works in the tower at IRP (actually his friends family used to own a 1/8mile track in Bunkerhill, Indiana), so I've gotten to go up there during the MAC Tools US Nationals It's so much fun getting out there and seeing what she can do!

And yeah, the tech guy thought my car was stock...cause it looks pretty stock...so he didn't even check under the hood LOL
 
G

GT02MG

New Member
Dec 11, 2004
49
0
0
MD
Apr 28, 2006
#6
  • Apr 28, 2006
  • #6
Yea it takes a lot of practice keep trying....I still cant drive good at the track and my car isnt that fast but I have a lot of fun.
 

jasonh_86

I
May 20, 2005
1,156
2
48
Arkansas
Apr 28, 2006
#7
  • Apr 28, 2006
  • #7
nice times.. keep on practicing and get some sticky tires and it'll be gettin on down there! And hell yeah it's addicting
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Apr 28, 2006
#8
  • Apr 28, 2006
  • #8
Heh thanks guys!

So whats the best and widest drag radial I can fit on 17x8's??
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Apr 28, 2006
#9
  • Apr 28, 2006
  • #9
I'd say 275/40/17s would be the widest I'd try. Nitto's will last longest but wont bite as hard, BFG's will bite harder but wont last as long as the nittos, and MT E/T Streets will hook the best and wont last as long as the others. The BFGs are a good middle man, I'd start there.
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Apr 28, 2006
#10
  • Apr 28, 2006
  • #10
helty said:
I'd say 275/40/17s would be the widest I'd try. Nitto's will last longest but wont bite as hard, BFG's will bite harder but wont last as long as the nittos, and MT E/T Streets will hook the best and wont last as long as the others. The BFGs are a good middle man, I'd start there.
Click to expand...

Awesome, thats pretty much what I gathered from talking to people at the track today
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Apr 29, 2006
#11
  • Apr 29, 2006
  • #11
BennyDaBall said:
Super addicted! I've been giong to watch the races since I was a kid, and my dads friend works in the tower at IRP (actually his friends family used to own a 1/8mile track in Bunkerhill, Indiana), so I've gotten to go up there during the MAC Tools US Nationals It's so much fun getting out there and seeing what she can do!

And yeah, the tech guy thought my car was stock...cause it looks pretty stock...so he didn't even check under the hood LOL
Click to expand...


WOW they did not even check under the hood.. No way that would ever happen at the track I run at (NED) they check everything at my track. it's not even enough to show them a helmet on my high 13 second car.. they want to see the dot numbers on it.
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Apr 29, 2006
#12
  • Apr 29, 2006
  • #12
Yeah, the guy seemed really lazy...there was some full out drag trans am infront of me, and from the rear I could see a buncha junk, but all they did was lift the hood off for like 10 seconds and put it back on. Then the guy behind me in a corvair just had to pop his trunk to make sure he was still running rear engine. Later the Kenny Brown Kermit showed up, apparently with the guy who bought it when it was on eBay, and he didn't seem to have to much trouble passing tech (even though it is a full on track car with a bunch of experimental parts lol). I think the only car I saw that spent more than 30 seconds at the tech booth was the alcohol dragster some guy rolled out of his trailer
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Apr 29, 2006
#13
  • Apr 29, 2006
  • #13
Got some vids!

My girlfriend filmed my runs (THANKS KID! ) ~ Checkout the video, it's a bit big at 5.61mb, you can get it on Putfile or on my site below:

Click here to watch FirstRaces

BennyDaBall.com ~ First drag runs!


If you listen you can hear that I have absolutely no traction in first (and I was easing it out), and in the second run you can actually hear me lose traction going into second, and even third, then by the time I'm in fourth i'm too far away to hear over the other cars heh.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Apr 30, 2006
#14
  • Apr 30, 2006
  • #14
WOW, nice times man! Very good trap too . You defenatly trapped better than I thought you would @ 370RWHP
 
C

CrazyHorn

New Member
Jun 14, 2004
184
1
0
Gatineau
Apr 30, 2006
#15
  • Apr 30, 2006
  • #15
One thing I am wondering why is there some pubic hair on your timeslip ?
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Apr 30, 2006
#16
  • Apr 30, 2006
  • #16
CrazyHorn said:
One thing I am wondering why is there some pubic hair on your timeslip ?
Click to expand...

lmao wool sweater I swear! :SNSign:

I still can't decide...Nittos, BFG's, or MT's. I'll prolly go wit the BFG's...
 

AmBo

Active Member
Feb 3, 2004
1,027
1
36
New Jersey
Apr 30, 2006
#17
  • Apr 30, 2006
  • #17
What tires do you have now that you needed to burn out in the waterbox with?
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Apr 30, 2006
#18
  • Apr 30, 2006
  • #18
GSD3's, and if you look carefully I'm only barely rolling into it to a tiny bit. Plus there wasn't much fresh water sprayed down. Also, with the way it's setup the track guys were pretty much making everyone who was doing a burnout go through the water. Plus no reason not to, just helps break traction a bit...
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
May 1, 2006
#19
  • May 1, 2006
  • #19
Wow, I was looking at your 1/8 mile trap, and it was exactly what I was doing this weekend at full weight in houston! So it looks like past the 1/8 the SC really lets you pull...SCs like load. I raced some 05 saleen (believe to be supercharged)...I was right with him up to the 1/8 mile....but then he just started driving away lol

BTW I was only doing mid-high 106s this weekend in the 1/4. Best 1/8 is a 86.X.
 

AmBo

Active Member
Feb 3, 2004
1,027
1
36
New Jersey
May 1, 2006
#20
  • May 1, 2006
  • #20
Very nice times Kenny. I can't wait to get mine! What numbers are you putting down?

And yea Hot, especially with the Vortechs. They love the top end of the rpms and that's where power comes. Yea, a Kenne will spank you street light to street light, but take it to the track (and that is the ONLY place it SHOULD be taken ) and you have got yourself a race!
 
You must log in or register to reply here.

Similar threads

S
1998 Mustang Gt Rattling sound, cannot locate. Video included
  • studerman1
  • Mar 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
247
1996 - 2004 SN95 Mustang -General/Talk- Apr 1, 2026
studerman1
S
S
New motor help. First start successful. Now will not turn over.
  • SavStang
  • Jun 1, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
132
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2025
SavStang
S
O
My rebirth, Hi from PA
  • onemore1987
  • Jun 28, 2026
  • The Welcome Wagon
Replies
3
Views
127
The Welcome Wagon Jun 29, 2026
onemore1987
O
D
Drivetrain car still rolling while in gear and off
  • dqureshi06
  • Jan 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
234
Fox 5.0 Mustang Tech Jan 24, 2026
General karthief
Project Fox Revival (please send help)
  • sleep-e
  • Jan 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
250
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 22, 2026
KRUISR
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?