Flaming River steering column - wiring question

D

diverdaveman

New Member

Feb 19, 2004

45

0

0

May 15, 2006

#1

• May 15, 2006

• #1

I installed a new FR column and everything fit very nicely, thanks to the guys at Mustang Depot. I’m having difficulties wiring the original wiring harness to the new FR harness. I have everything wired except the turn signals. Has anyone installed the FR column and have some good documentation on which original wires goes to the new wires? Any help would be appreciated.

Thanks,
Dave

 

thehueypilot

Active Member

Feb 25, 2004

1,084

0

37

Medina,Tennessee

May 15, 2006

#2

• May 15, 2006

• #2

I wired mine to the instructions:
Column Wiring .................... Vehicle Wiring
J- DK blue - RF TS .............white w/blue stripe
H- LT blue - LF TS..............Green w/white stripe
N- Dk Green - RR TS............orange w/blue stripe
M- Yellow- LR TS................Green w/orange stripe
L- Purple - TS pwr..............Blue

 

D

diverdaveman

New Member

Feb 19, 2004

45

0

0

May 17, 2006

#3

• May 17, 2006

• #3

Thanks for your responce:

One more question. I noticed that you didn't say anything about the yellow wire. Did you hook this to anything? I'm using it to power the FR column, but will the blue wire do the same? The blue wire is the only wire that is not connected to anything. (Blue and yellow wire are from the Mustang wiring harness, not the column)

Thanks,
Dave

 

thehueypilot

Active Member

Feb 25, 2004

1,084

0

37

Medina,Tennessee

May 17, 2006

#4

• May 17, 2006

• #4

Yellow wire (vehicle) connects to yellow wire on FR harness which is the horn relay.