Flaming River steering...

K

kyle67

New Member

Jun 28, 2003

60

0

0

Baton Rouge, LA

May 18, 2004

#1

• May 18, 2004

• #1

I am fired up....I just ordered the new FR slave cylinder and control valve for my 67 w/power steering. I decided not to go with a rack setup, but I am thinking of purchasing the steering box also. I have been told that the steering box fits power and manual cars. With mine being power will this make a difference? Thanks for any help....

 

R

Ronstang

New Member

Apr 4, 2004

1,294

0

0

Houston Texas

May 18, 2004

#2

• May 18, 2004

• #2

The Flaming River steering box is a direct replacement for your steering box so no worries there. If someone has a manual box the FR one simply gives them the 16:1 ratio of the PS setup.....which is the way to go for manual anyway IMHO.

 

M

Mosse

Founding Member

Oct 22, 2002

229

0

0

Finland, Tampere

May 18, 2004

#3

• May 18, 2004

• #3

I just ordered myself on, allthough mine stays manual..

Sportscars aren´t suppose to have powerbrakes or steering, otherwise driving them wouldn´t be sports

 

K

kyle67

New Member

Jun 28, 2003

60

0

0

Baton Rouge, LA

May 18, 2004

#4

• May 18, 2004

• #4

is it worth it for me to get a fresh box?

 

T

TT670

Founding Member

Jul 10, 2001

360

9

28

May 18, 2004

#5

• May 18, 2004

• #5

the FR boxes really tighetn up the 40 yr old steering, you can buy 67-68 short shaft Flaming river boxes on Ebay for $345 all the time. I just bought a long shaft for my 65 for $375 and they are always listed on there.

 

M

mustangdave

My rearend needs a stud and two nuts.

Founding Member

Feb 26, 2002

2,976

1

56

North Carolina

May 18, 2004

#6

• May 18, 2004

• #6

I didn't know they had a slave cylinder, (power steering ram), for our cars. Where did you find it? What's different about it? I knew they offered rack and pinion, gear boxes, and steering columns, but not a stock replacement cylinder.

 

K

kyle67

New Member

Jun 28, 2003

60

0

0

Baton Rouge, LA

May 18, 2004

#7

• May 18, 2004

• #7

I actually saw a post on the other classic forum where someone regretted converting to a rack and the post had a cross-ref to FRs site and there it was... He said he shoud have gotten that for the money.....so that is what I'm doing since my cylinder leaks I'm replacing it all....I think I'm going to order the box too.How can I tell what sector shaft size I have?

 

M

Mosse

Founding Member

Oct 22, 2002

229

0

0

Finland, Tampere

May 19, 2004

#8

• May 19, 2004

• #8

You can measure it from under the car. The shaft comes thru the nut.