• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

flat toped cam to roller

  • Thread starter Thread starter billison
  • Start date Start date Jul 16, 2006

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jul 16, 2006
#1
  • Jul 16, 2006
  • #1
my car is a 85 and i hope to rebuild it this winter, can i swap out the flat topped cam for a roller or do i need a new block? thanks
 

83Mustang427TT

New Member
Jan 18, 2006
162
0
0
Jul 16, 2006
#2
  • Jul 16, 2006
  • #2
1st its a flat tappet cam referring to the lifters not being rollers ,Second your car year is the 1st year of the roller cam engines so yours is a roller cam carbed motor from the factory
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jul 16, 2006
#3
  • Jul 16, 2006
  • #3
i did not know that about the lifters, and i thought only the carb'd cars had the roller in it, and thecfi had the flat?
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jul 17, 2006
#4
  • Jul 17, 2006
  • #4
I know the 4 barrel cars were rollers but i'm not sure about the others. You'll have to pull the intake and find out.
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jul 17, 2006
#5
  • Jul 17, 2006
  • #5
CFI was flat tapped. Carbed was roller.
 
B

brammabull69

New Member
Jan 9, 2006
50
0
0
carbonado, wa
Jul 17, 2006
#6
  • Jul 17, 2006
  • #6
79-84 was flat tappet and 85-93 is rollers
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jul 17, 2006
#7
  • Jul 17, 2006
  • #7
i think my car was a late release that year cuz i have the one fuel pump in the tank and not the second inline. so if it is a flat toped what all do i have to get to change it over to a roller? thanks
 
You must log in or register to reply here.

Similar threads

T
Oil burning on my recently buil 302
  • The blk67
  • May 15, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
251
Fox 5.0 Mustang Tech May 15, 2026
Noobz347
D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
530
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
C
Flat tappet to roller lifters--older block
  • chazmanaz
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
322
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 27, 2026
Noobz347
K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
528
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
Engine Forged flat top pistons from 5.0 fit a 351 build?
  • PonyGTrider
  • May 22, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
2K
Fox 5.0 Mustang Tech Feb 1, 2026
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?