• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Flipping out Please Help ASAP

  • Thread starter Thread starter NeQX
  • Start date Start date Mar 11, 2004

NeQX

Founding Member
Sep 30, 2002
904
0
0
Infront Of You, NY
Mar 11, 2004
#1
  • Mar 11, 2004
  • #1
my stupid BBK AFPR wont go below 44psi no vacuum, screw can go so loose it comes out it just stops going down after 44 its so retarded, its a auto-meter sport comp fp gauge screw in perfectly into shrader valve off a dual fitting 1 going to n2o 1 for gauge, im going to dyno tune car tomorrow before track on sunday please help me get this fuel pressure gauge lower
 
B

BlueThunder1988

New Member
May 19, 2003
102
0
0
Mar 12, 2004
#2
  • Mar 12, 2004
  • #2
Check and make sure that your rubber fuel return lines aren't kinked a bit... if not, bad AFPR maybe?
 

NeQX

Founding Member
Sep 30, 2002
904
0
0
Infront Of You, NY
Mar 12, 2004
#3
  • Mar 12, 2004
  • #3
checked lines, they seem fine
 

NeQX

Founding Member
Sep 30, 2002
904
0
0
Infront Of You, NY
Mar 12, 2004
#4
  • Mar 12, 2004
  • #4
buMp, dyno it 2 hours hurry
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Mar 12, 2004
#5
  • Mar 12, 2004
  • #5
Could be a weak FP regulator that will not hold back the pressure since now your new pump is nice and strong and not very restricted like the clogged one. This is a common issue with many regualtors as they were or get old, it also depends on the gas that is rab through them, some fuel and or additives have more effect of the diaphram.
 

NeQX

Founding Member
Sep 30, 2002
904
0
0
Infront Of You, NY
Mar 12, 2004
#6
  • Mar 12, 2004
  • #6
ok im leaving to go get dyno'd maybe the mustang place can figure it out while im there, ill post results after guys

 

NeQX

Founding Member
Sep 30, 2002
904
0
0
Infront Of You, NY
Mar 12, 2004
#7
  • Mar 12, 2004
  • #7
Ok I figured this crap out finally, fuel pressure worked best at about 50psi even with the 255lph in, they said its due to the C&L cause it leans the car out.............first pull was 255rwhp which means

13.3@102 was with 255rwhp

So, since we changed the plugs which somehow got shot from the old pump going really lean the next pull on dyno was

308.1rwhp
336.8rwtq

Track Sunday! car is cured

 
You must log in or register to reply here.

Similar threads

S
Fuel 1992 351w Swap Fuel Pressure Issue/problems - Please Help!
  • stussy2870
  • May 14, 2019
  • Fox 5.0 Mustang Tech
Replies
13
Views
3K
Fox 5.0 Mustang Tech May 15, 2019
General karthief
R
89' Stang - MS2PNP - Post tune - Surging issues
  • rushcanuck
  • May 8, 2020
  • Digital Self-tuning Forum
Replies
5
Views
2K
Digital Self-tuning Forum May 9, 2020
a91what
Progress Thread finishing touches on my stroker build
  • doobismaximus
  • Jul 2, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 1, 2021
nickyb
  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
R
Engine 1992 Mustang Hesitation/Cutting-Out
  • RTW0223
  • May 2, 2018
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
14K
Fox 5.0 Mustang Tech May 26, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?