Flowbench results?

Flowbench results & internal balancing check

I have a couple of questions for you all.

I am in the middle of a rebuild of my 302, but I started the work about 8 years ago. At that point, I got most of the parts, but didn't actually start the build for various personal reasons. Now, as I am getting back to it, I find that I have lost all my old information on the custom ported heads intake and other pieces I put together. Is there someplace here in Southern California (preferably in the Long Beach/North OC area) where I can take my intake and heads and get them flow-benched? I am just looking to make sure that they are well matched so I can move on to the next stage of the build without worrying about getting them worked on to match up better.

Also, I am pretty sure that I got the thing internally balanced. The local machine shop wants to charge me $165 to check it to make sure. Is there any way for me to check it at home? I realize that if I am wrong that I could be endangering the engine, but I just want a sanity check before going and blowing another $200 on this thing.

Thanks for the help.

David

I have a set of Twisted Wedge heads and a Ford GT40 intake. Obviously, the upper on the GT40 can't be ported, but the lower was supposedly done. I want to make sure that the lower flows as well as the upper does.


David