Fluid leaking from the rear...

cjman15

Banned

Apr 15, 2004

1,009

0

0

Fairfield, PA

Jun 8, 2005

#1

• Jun 8, 2005

• #1

Just noticed a tiny pool under my rearend tha other day... I'm gonna go out there and try to tighten the bolts up if I can. I'm not sure how new (or old) the seal is because I'm not sure when the 4.10 gears were put in my car. (Bought it with them in it) Is it tough to change that if it's shot?

 

srothfuss

Last night I stabbed the same guy 7 times in a row

Oct 17, 2004

1,796

3

0

Woodward Ave.

Jun 8, 2005

#2

• Jun 8, 2005

• #2

nope... if you don't mind the smell of the fuild that will splash all over the place.

Just unbolt the cover. Scrape off any excess gasket material and the apply some RTV. Let it set up then reattach and poof... no more leaky rear end.

30minute job tops.

 

cjman15

Banned

Apr 15, 2004

1,009

0

0

Fairfield, PA

Jun 8, 2005

#3

• Jun 8, 2005

• #3

How do I refill the fluid then? I don't know much about the rear.

 

srothfuss

Last night I stabbed the same guy 7 times in a row

Oct 17, 2004

1,796

3

0

Woodward Ave.

Jun 8, 2005

#4

• Jun 8, 2005

• #4

Oh...

There be a plug on the drivers side front (a little higher than the pinion) of the diff. Take a 3/8" socket wrench (w/o a socket) and you can remove the plug. You'll need about 2 bottles of gear lube to fill it back up. I usually just stick a flexible funnel in the hole and pour away (slowly). It'll be full once the new fluid starts coming out of the fill hole. Then just stick the plug back in and your all done.

 

cjman15

Banned

Apr 15, 2004

1,009

0

0

Fairfield, PA

Jun 8, 2005

#5

• Jun 8, 2005

• #5

I'll have to give it a try. Thanks alot for the info.

 

cjman15

Banned

Apr 15, 2004

1,009

0

0

Fairfield, PA

Jun 8, 2005

#6

• Jun 8, 2005

• #6

What size bolts are on the diff girdle?

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Jun 8, 2005

#7

• Jun 8, 2005

• #7

I think I missed something, but are you sure it is not the pinion seal leaking?

Good luck.

 

cjman15

Banned

Apr 15, 2004

1,009

0

0

Fairfield, PA

Jun 8, 2005

#8

• Jun 8, 2005

• #8

I'm not sure. It looks to be coming from the bottom of the pumpkin, right where the girdle attaches. Not sure what the pinion seal is.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Jun 8, 2005

#9

• Jun 8, 2005

• #9

cjman15 said:

I'm not sure. It looks to be coming from the bottom of the pumpkin, right where the girdle attaches. Not sure what the pinion seal is.

Click to expand...

Gotcha. I like to clean stuff up and then watch it to find the source of the leak.

The pinion seal is toward the front of the car - where the driveshaft attaches to the pumpkin. Just toward the rear (where the pinion goes into the pumpkin) is where the seal is. it will tend to allow fluid to drip off the bottom of the pumpkin or even off the flange (depends upon how the car is parked).

good luck.

 

89MustangGX

I have nothing productive to add!

Jul 3, 2001

10,262

1

0

Mill Creek, WA

Jun 8, 2005

#10

• Jun 8, 2005

• #10

I would suggest taking the fill plug out first to make sure it comes out -- you never know!

 

trents99

Founding Member

Jun 28, 2002

438

0

0

Hampton, GA

Jun 9, 2005

#11

• Jun 9, 2005

• #11

And more than likely if it was your pinion seal the under side of your car and most of the axle will be covered in gear oil if it has been leaking for a while.