FMS-M7560-C302? Is that the correct King Cobra clutch # for 2000 GT (T45)?

[5spd GT]

My friend needs to know if that is the correct clutch kit for his car which is a 2000 GT?

FMS-M7560-C302? So is that the correct clutch kit that will bolt right up on his car. Same splines and everything (10 spline)?

 

[5spd GT]

bump.

Will my friend need any other things to adjust the King Cobra or can he use the factory setup. I know an adjustable quadrant/cable would be nice...but he is on some what of a budget...

Will just doing a direct swap work?

 

[SunburstGoldGT]

I just put the same on in my car about 3000 miles ago and i used stock cable/quadrant it works fine. Just pull up the clutch pedal to reset the stock adjuster, my pedal fell to the floor at the end of adjustment and then i just clicked it back up to where it would engage/disengage correctly. Good Luck

 

[5spd GT]

So that is the correct part number for the 2000 GT?

 

[5spd GT]

bump...is it the correct part number?

Is the 2000's a 10 spline input shaft with a 1/16th inch pilot bearing hole? 10.5in. clutch right?

 

[5spd GT]

anybody?

 

[5spd GT]

So nobody has a King Cobra on their 99-00?

 

[5spd GT]

One more try...so my friend can order this?

 

[TacBear]

It is my understanding that the "King Cobra" clutch fits ALL 99-04's.

 

[SunburstGoldGT]

Yeah it was made for earlier mustangs but does fit a 2000 for sure, im running one now, no problems.

 

[5spd GT]

It is my understanding that the "King Cobra" clutch fits ALL 99-04's.

In mid-01 they changed the transmission and it won't fit that (3650)...