FMS-M7560-C302? Is that the correct King Cobra clutch # for 2000 GT (T45)?

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Apr 13, 2005

#1

• Apr 13, 2005

• #1

My friend needs to know if that is the correct clutch kit for his car which is a 2000 GT?

FMS-M7560-C302? So is that the correct clutch kit that will bolt right up on his car. Same splines and everything (10 spline)?

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Apr 13, 2005

#2

• Apr 13, 2005

• #2

bump.

Will my friend need any other things to adjust the King Cobra or can he use the factory setup. I know an adjustable quadrant/cable would be nice...but he is on some what of a budget...

Will just doing a direct swap work?

 

SunburstGoldGT

New Member

Dec 17, 2003

133

0

0

Blacksburg, VA

Apr 13, 2005

#3

• Apr 13, 2005

• #3

I just put the same on in my car about 3000 miles ago and i used stock cable/quadrant it works fine. Just pull up the clutch pedal to reset the stock adjuster, my pedal fell to the floor at the end of adjustment and then i just clicked it back up to where it would engage/disengage correctly. Good Luck

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Apr 14, 2005

#4

• Apr 14, 2005

• #4

So that is the correct part number for the 2000 GT?

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Apr 15, 2005

#5

• Apr 15, 2005

• #5

bump...is it the correct part number?

Is the 2000's a 10 spline input shaft with a 1/16th inch pilot bearing hole? 10.5in. clutch right?

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Apr 16, 2005

#6

• Apr 16, 2005

• #6

anybody?

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Apr 16, 2005

#7

• Apr 16, 2005

• #7

So nobody has a King Cobra on their 99-00?

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Apr 17, 2005

#8

• Apr 17, 2005

• #8

One more try...so my friend can order this?

 

TacBear

Founding Member

Dec 28, 2001

1,243

0

0

Jasper, AL

Apr 17, 2005

#9

• Apr 17, 2005

• #9

It is my understanding that the "King Cobra" clutch fits ALL 99-04's.

 

SunburstGoldGT

New Member

Dec 17, 2003

133

0

0

Blacksburg, VA

Apr 17, 2005

#10

• Apr 17, 2005

• #10

Yeah it was made for earlier mustangs but does fit a 2000 for sure, im running one now, no problems.

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Apr 19, 2005

#11

• Apr 19, 2005

• #11

TacBear said:

It is my understanding that the "King Cobra" clutch fits ALL 99-04's.

Click to expand...

In mid-01 they changed the transmission and it won't fit that (3650)...