• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

? for 3G alternator owners

  • Thread starter Thread starter RYC CUKR
  • Start date Start date Oct 20, 2005

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Oct 20, 2005
#1
  • Oct 20, 2005
  • #1
Where did you get your 3G at? Parts house or did you order it?

It looks like my alt took a crap on me on the way home and almost burned the car. It fried the fusible link that connects the BL/O wires from the alt to the starter relay. Got most of the way home and the car died about a mile from home and when I popped the hood there was all sorts fo smoke coming from around the starter relay. Then I could actually see a little flame. Got the fire out. Walked home and came back with my truck and a big light. I could see that the fusible link from the BL/O wire to the starter relay was burned in half. That would be where the smoke and flame was coming from.

So I haven't tested it yet, since it was 11:45 pm when it happened. But to me it seems that the alternator is bad. I figure that if it is now is a good time to upgrade.

On a side note I was on my way back from the track where I knocked .22 sec of my best time. I am down to 14.18@97.93 mph. The track was hooking up pretty good and it was cooler and a lot less humidity than last time I went.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Oct 20, 2005
#2
  • Oct 20, 2005
  • #2
PA alts are common. I run a Boss unit.
I would have used a NEW one from the parts store, but they were 190 bucks.

Good luck and congrats on your times.
 

sgarlic

Founding Member
Apr 21, 2001
3,085
1
56
Oct 20, 2005
#3
  • Oct 20, 2005
  • #3
Found mine used on ebay for 30 bucks, then bought the install kit from PA since I'm too lazy to buy the parts myself.
 

trents99

Founding Member
Jun 28, 2002
438
0
0
Hampton, GA
Oct 20, 2005
#4
  • Oct 20, 2005
  • #4
Got mine from Advance and they took my stock alt as a core. Bought the wire from them too. Got the fuse link from parts express.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Oct 20, 2005
#5
  • Oct 20, 2005
  • #5
Pa-performance is where I purchased mine. I converted to the 1 wire setup which by the sounds of it is what you are going to have to do anyways. Sorry to hear about your car but an alt and some wires is a small price seeing what potentially could have happened.
Kevin
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Oct 20, 2005
#6
  • Oct 20, 2005
  • #6
Sicarius428 said:
Pa-performance is where I purchased mine. I converted to the 1 wire setup which by the sounds of it is what you are going to have to do anyways. Sorry to hear about your car but an alt and some wires is a small price seeing what potentially could have happened.
Kevin
Click to expand...


Yeah the alternative was not good. I figure that in the end I got off lucky cause it could have been worse and now I get to upgrade with out having to explain why I am taking off a good part just to put another in.
 

88-GT

Member
Oct 8, 2004
183
2
18
Oct 20, 2005
#7
  • Oct 20, 2005
  • #7
I got mine as salvage from an insurance broker. You can actually get some pretty sweat deals, paid lest than $100(cdn.) for it and works great. Just know what car you are looking to get one off of and go for it. For install I just bought everything and did it myself. Dont be intimidated by it, this was the easiest thing I have done for mods soo far, goes really smoothly.
 
You must log in or register to reply here.

Similar threads

Electrical Ron Francis Headlight / Alternator Harness
  • dan50
  • Apr 30, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
202
Fox 5.0 Mustang Tech Apr 30, 2026
dan50
F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
558
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
Electrical Alternator not charging after terminator 2 install.
  • Sfab79
  • Aug 24, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
38
Views
790
Fox 5.0 Mustang Tech Jun 29, 2026
AeroCoupe
Resolved Holley terminator integration into CCRM
  • BrandonMP
  • Feb 25, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
232
SN95 4.6L Mustang Tech Feb 27, 2026
BrandonMP
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
246
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?