Up for sale is my recently removed 331 stroker engine.
I pulled it because I am putting a stock 302 in the car to sell it.
Short block only = $3,000 (includes water pump, balancer, motor mounts)
Long block only = $3,500 (includes above, plus heads, pushrods, rockers, valve covers)
Fully dressed with all parts = $5,000
Details below:
Here's the list -
Stock foxbody roller block with girdle
Scat crank and rods (forged)
Icon R47-B forged 2618 dome pistons
Ford Racing X302 heads - 64cc, 178cc, 1.94/1.54 valves
Bolt-down Roller rocker conversion 1.6
Custom cam (was told it is similar spec to Comp XE274).
Comes with water pump, Milodon oil pan, 28oz balancer, and motor mounts.
Includes Ford Mustang finned valve covers and NGK 8 spark plugs.
Made 320rwhp and 360rwtq. With a shot of nitrous it made 445rwhp and 530rwtq.
Long block price as listed above = $3,500
Optional parts -
Accufab 75mm throttle body and spacer
Big Dogs Stage 2 ported Explorer GT40 intake
BBK shorty headers
39# injectors with adapters to stock harness
Pro-M 75mm bullet mass air meter calibrated for cold air and 39# injectors
Moroso fender well cold air inlet with filter
Ford Racing 9mm plug wires
Everything as listed with engine = $5,000
Located outside of Raleigh, NC.
Thanks,
Ryan
Here's a link to my video prior to removal on 6/29/2026.
I pulled it because I am putting a stock 302 in the car to sell it.
Short block only = $3,000 (includes water pump, balancer, motor mounts)
Long block only = $3,500 (includes above, plus heads, pushrods, rockers, valve covers)
Fully dressed with all parts = $5,000
Details below:
Here's the list -
Stock foxbody roller block with girdle
Scat crank and rods (forged)
Icon R47-B forged 2618 dome pistons
Ford Racing X302 heads - 64cc, 178cc, 1.94/1.54 valves
Bolt-down Roller rocker conversion 1.6
Custom cam (was told it is similar spec to Comp XE274).
Comes with water pump, Milodon oil pan, 28oz balancer, and motor mounts.
Includes Ford Mustang finned valve covers and NGK 8 spark plugs.
Made 320rwhp and 360rwtq. With a shot of nitrous it made 445rwhp and 530rwtq.
Long block price as listed above = $3,500
Optional parts -
Accufab 75mm throttle body and spacer
Big Dogs Stage 2 ported Explorer GT40 intake
BBK shorty headers
39# injectors with adapters to stock harness
Pro-M 75mm bullet mass air meter calibrated for cold air and 39# injectors
Moroso fender well cold air inlet with filter
Ford Racing 9mm plug wires
Everything as listed with engine = $5,000
Located outside of Raleigh, NC.
Thanks,
Ryan
Here's a link to my video prior to removal on 6/29/2026.
Last edited: