• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Fox body trans compatability with '69 block (T-56)

  • Thread starter Thread starter JC6715
  • Start date Start date Dec 20, 2007

JC6715

Member
Oct 24, 2005
284
0
16
Hillsboro, Oregon
Dec 20, 2007
#1
  • Dec 20, 2007
  • #1
I am looking at a used T56 trans from D&D Performance that the seller says is for a '89 Fox Body. Says the kit has everything needed to bolt up to a 302 or 351 engine and that it comes with a D&D aluminum bell housing.

I have a 331 using a '69 302 block and am not very knowledgeable about bolt patterns between the years for block to bell housings.

I know it is going to require tunnel mods to get the T56 in, but will the Fox body bell housing bolt to my '69 block?

Thanks guys!
 

JC6715

Member
Oct 24, 2005
284
0
16
Hillsboro, Oregon
Dec 20, 2007
#2
  • Dec 20, 2007
  • #2
I emailed D&D and asked them if it will fit. I was told it will bolt up no problem.

Not that I don't trust him, but would like to hear it from more than one source before I pull the trigger. That's lots of dough ya know.

Can anyone confirm or disprove the fitment?

THANKS
 

Rusty67

20+ Year Stangneter
Dec 3, 2002
3,749
37
109
LA, CA
Dec 20, 2007
#3
  • Dec 20, 2007
  • #3
Yes, it will fit the engine but I don't think it will fit the car. You are going to have to chop the trans tunnel up to make it fit in there. Someone sells a trans tunnel kit for this that you can weld back in after you cut the tunnel to make the trans fit. Someone talked about it recently in another thread.

FYI, all 289/302/5.0/351w blocks have the same bell housing bolt patern.
 

JC6715

Member
Oct 24, 2005
284
0
16
Hillsboro, Oregon
Dec 20, 2007
#4
  • Dec 20, 2007
  • #4
Rusty67 said:
Yes, it will fit the engine but I don't think it will fit the car. You are going to have to chop the trans tunnel up to make it fit in there. Someone sells a trans tunnel kit for this that you can weld back in after you cut the tunnel to make the trans fit. Someone talked about it recently in another thread.

FYI, all 289/302/5.0/351w blocks have the same bell housing bolt patern.
Click to expand...

Thanks Rusty! I knew going into this deal the trans tunnel would need some surgery, which I am fine with doing. Good lookin out...

I've seen the many other threads talking about making a T56 fit, just didn't see an answer to my original question. Now I know and as they say, knowing is half the battle.
 

Rusty67

20+ Year Stangneter
Dec 3, 2002
3,749
37
109
LA, CA
Dec 20, 2007
#5
  • Dec 20, 2007
  • #5
G.I. Joe !
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
829
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
For Sale 91 Mustang LX 5.0 Coupe 6-speed
  • fastang67
  • Nov 30, 2023
  • Fox Body Mustangs For Sale (1979-93)
Replies
8
Views
4K
Fox Body Mustangs For Sale (1979-93) Jul 17, 2024
FastDriver
H
Fox Body Mustang 1988 5.0 AOD - Overdrive Cable
  • Hueki
  • Feb 4, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 6, 2021
Hueki
H
S
1979 Fox Body Capri Tranny Update to T5
  • Steve&Dick
  • Oct 18, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2019
Blown88GT
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?