• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Fox Electric Fan

  • Thread starter Thread starter 89_LX
  • Start date Start date May 26, 2008

89_LX

Member
Sep 16, 2007
63
0
17
Bellingham, WA
May 26, 2008
#1
  • May 26, 2008
  • #1
I have been reading about the topic and it sounds like most agree the the mark VIII fan is the best,(for power and fit) i was just wondering what year of the Mark VIII to look for.

I Have a sn95 fan but the plastic is melted around one of the terminals on the connector and fan plug so I decided to go for the Mark VIII fan

and I have a 130a 3g alt
 
B

blueblazes

New Member
Jan 11, 2008
76
0
0
May 26, 2008
#2
  • May 26, 2008
  • #2
I snagged up a taurus fan and plug for 85 shipped from a guy on the corral they flow really well to
 

Saleen0679

10 Year Member
Apr 14, 2005
876
24
49
Yakima, WA
May 26, 2008
#3
  • May 26, 2008
  • #3
Taken from
http://www.qsl.net/wd4ngb/markviii.htm

part # is F3LY8C607A

93-96 use p/n F3LY 8C607 A @ 245.80
The 93-96 spin 1100 rpmson low and 1850 on highspeed.

97's use p/n F7LZ 8C607 AB @ 196.23
98's use p/n F8LZ 8C607 AA @ 140.11
The 97-98 spin 1800 on low and 2225 on high.

They all look the same, all come with a shroud. The 93-96 spin slower according to Ford Motorsport Tech line.

Also check out
http://www.geocities.com/smithmonte/Auto/MarkVIII_Fan.htm
 
S

sjd302

New Member
May 11, 2008
11
0
0
May 26, 2008
#4
  • May 26, 2008
  • #4
i have the black magic elec. fan w/ alumn. rad . it has the relay & thermostat built in for easy install. & can be wired for the fan to run on & off after u shut the car off.
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
May 26, 2008
#5
  • May 26, 2008
  • #5
here ia what i have in my 83.. http://mass-air.com/Products.htm#Standard Electric Fan Kit
 

LordMustangGT

Member
Jan 9, 2006
118
0
17
Port Orchard, WA
May 26, 2008
#6
  • May 26, 2008
  • #6
I have mark 8 fans on both my foxes. They are the best fan I've ever had. They may need a little trim but nothing thats hard. They draw something like 42amps at full power, and I find it hard to find relays to handle it. 10g wire is a must!!!! and Flex-a-lite makes the perfect relay for it! You will need the 3g alt. upgrade of cource.

http://store.summitracing.com/partd...400226+4294924500+4294860934+115&autoview=sku


Good luck

Matt
 
You must log in or register to reply here.

Similar threads

M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
711
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Resolved Holley terminator integration into CCRM
  • BrandonMP
  • Feb 25, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
274
SN95 4.6L Mustang Tech Feb 27, 2026
BrandonMP
C
What does this connector go into?
  • charlie1775
  • Jun 22, 2025
  • SN95 4.6L Mustang Tech
Replies
0
Views
146
SN95 4.6L Mustang Tech Jun 22, 2025
charlie1775
C
Brakes ABS in a Fox - Mark Bettin
  • AeroCoupe
  • Mar 28, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech May 17, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?