• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Fox hood latches

  • Thread starter Thread starter tuhockey11
  • Start date Start date Nov 27, 2007
T

tuhockey11

New Member
Apr 7, 2003
81
0
0
PA
Nov 27, 2007
#1
  • Nov 27, 2007
  • #1
I recently aquired a 92 GT, but previously I have owned a 90 GT and 91 Notchback. On both of those cars the hoods ended up flying up on the highway. i have also heard of others having this happen to them. Is there anything I can do to prevent this from happening again, it causes major damage and just plain sucks. Also, hood pins are out of the question, i cant stand them.
 

samickguy15

Member
Sep 1, 2005
404
0
16
Delavan, IL
Nov 27, 2007
#2
  • Nov 27, 2007
  • #2
Just make sure you latch it good and make sure the safety latch works. I always give mine a good yank after I close it to make sure it's latched. Sometimes it latches, but pops back up. You want to make sure it's greased/lubed every now and then too to keep from sticking. Other than that, hood pins are the only other option. There's always the nice low profile keyed hood pins. They're kind of a reverse pin thing...
 

87foxstang

Member
May 10, 2007
0
0
16
Cromwell, CT
Nov 27, 2007
#3
  • Nov 27, 2007
  • #3
Yea, just make sure its aligned properly. When i first put mine on, it came up a few times and the latch caught it, but then i adjusted the hood left a little and it fine now
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Nov 27, 2007
#4
  • Nov 27, 2007
  • #4
The safety catch is a huge help. Comes standard on all cars. Some people get rid of them to ditch weight I think. I down know how much faster your car would be with 1 ounce missing!! hehe
 

87foxstang

Member
May 10, 2007
0
0
16
Cromwell, CT
Nov 27, 2007
#5
  • Nov 27, 2007
  • #5
yea, IMO its completely stupid to get rid of it unless you have pins
 
T

tuhockey11

New Member
Apr 7, 2003
81
0
0
PA
Nov 27, 2007
#6
  • Nov 27, 2007
  • #6
Mine does hav the safety latch and it works, so i guess Im ok...The other two cars I had were modded before I got them, so i guess someone messed around with them. Leanred my lesson and only buy bone stock cars now
 

dgollem

20+ Year Stangneter
May 5, 2004
212
33
49
Waldorf MD
Nov 27, 2007
#7
  • Nov 27, 2007
  • #7
If you don't want hood pins I guess you could always fabricate some type of reverse pin system using a plastic coated wire rope/cable with enough slack that you could unhook it after you pop the hood. Bolt the cable to the hood side part of the latch and the pin to somewhere on the radiator support. Just a thought. Are you using aftermarket hoods or stock, never heard of a properly functioning stock hood flying off.
 
You must log in or register to reply here.

Similar threads

S
Hood latch connector
  • skkrtis
  • Aug 3, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
0
Views
175
2015 - 2023 (S550) Mustang -General/Talk Aug 3, 2025
skkrtis
S
S
4.6 spitting o-rings out of 2 injectors
  • skidad
  • Sep 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3 4
Replies
78
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Nov 4, 2026
skidad
S
Drivetrain Hood latch/cable issues
  • AnthonyA1234
  • Nov 1, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
946
Fox 5.0 Mustang Tech Nov 20, 2024
AnthonyA1234
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
Electrical/engine bay harness questions
  • djj62478
  • May 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
478
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 6, 2026
djj62478
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?