Well, got the vortech on, and tried to put the aftermarket strut tower brace on and it hits the top of my breather cap for the fox valve covers. I already bent the neck out of the way for the throttle body interference.
i'm not sure if this will work or not but can you cut the oil fil tube then put a short s bend rubber hose on then attach your breather to it ? pauls car i has that problem too. i moved my filler to the back of the pass. side valve cover behind the throttle body .
i had a local welder modify my filler neck into a chair pattern. Then i was able to swival it to the right possition... But that s house sounds like the same thing...
I had a similar problem with my aftercooler hitting the breather on the passenger side, so i swapped valve covers, and had a welder fill in the old breather hole, and had them weld in a new moroso breather.