From V6 to V8 ?

you would have to change the crossmember from a 96 and then maybe the tranny member. way too much work.

not as big of deal as everyone makes it out to be if your qualified and you have a donor car-you are gonne need the k-member and motor mounts the rear end,the motor of course the exhaust,the computer, wiring and etc if you have a donor you can pull it right off and swap it out. might be easier to get someone professional to do it for you if your not comfortable with all that.

~silver~

I will tell you exactly what you will need:

engine
tranny
radiator
fan
wiring harness
computers (getting the computer logistics together was the hardest of it all!)
master cylinder
new exhaust...it won't mount up the same..
driveshaft

really need, but not 100% necessary:

new rear axle..go up to the 8.8"
new suspension in the front...engine is much heavier
new fuel pump...mine eventually went out
new clutch...mine eventually went out


this is more of a headache than you will ever know...for the guy who said it isn't that big of a deal...try it...

if you have any questions...feel free to drop me an email..

you can also check my website, I have a ton of pics on there of the process..


hope that helps,
eric

where in lexington are you at? At UK? I used to go to EKU and saw a blue vert kinda similar to yours, but that's been 3 years ago

hey...

my wife graduated from eastern in 02...so you may have seen me down at eastern before...I am still at uk...graduate in may...


eric