Front end alignment specs after 5 lug conversion??

[MyBlackBeast]

I just finished my 5 lug swap using 95 spindles, Steeda bumpsteer kit and mm caster camber plates. What should be my alignment specs???

 

[Shaolin Crane]

I just finished my 5 lug swap using 95 spindles, Steeda bumpsteer kit and mm caster camber plates. What should be my alignment specs???

It all depends on what you are doing with the car.

 

[5.0Torx]

Just put it all back to stock

 

[MyBlackBeast]

So the factory specs is what i should go with??? It has ford B springs and i drive it mostly on the street maybe a couple of trips to the drag strip.

 

[Mustang5L5]

if it's street driven put it back to stock street specs...or at least as close as you can get it

 

[JadeGT]

You want.

Put the plates all the way back. The more caster the better.
-1 to -1.5 camber
1/16" toe in.

I did it myself using the directions in this thread.

How to do your own alignments, low cost, effective. - Corral Forums

If you don't choose to do it yourself then you need to sweet talk an alignment shop to set it up the way you want. IMHO it would be a waste to set it up to stock after adding C/C plates.

 

[MyBlackBeast]

I am so confussed some people say stick with the factory specs and others say dont

 

[Shaolin Crane]

I am so confussed some people say stick with the factory specs and others say dont

everyone has their own preference, i have mine setup for really aggressive driving but thats because the car get driven aggressive and i hate my tires