• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Frozen collector bolts, help!!

  • Thread starter Thread starter jmd2914
  • Start date Start date Jul 18, 2006
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
Jul 18, 2006
#1
  • Jul 18, 2006
  • #1
i replaced the studs that connect the header to the x pipe with hardened bolts with a nut on the other side, now the nut came off when i tried to take the x pipe off however the bolt seems to be frozen. impact gun isnt working and penetrating fluid isnt either. any ideas?
 

68keyblr

20+ Year Stangneter
Mar 17, 2003
946
20
49
Arizona
Jul 18, 2006
#2
  • Jul 18, 2006
  • #2
Try heating the nut and then hold an ice cube to the bolt
 
J

jstang209

20+ Year Stangneter
Jun 3, 2004
640
2
18
Stockton 209
Jul 18, 2006
#3
  • Jul 18, 2006
  • #3
i had similar problem, it sucked, i had to get my cut off tool and cut my H pipe near the 02 bung and pull the header out through the engine bay. Then i had to cut the studs bcthey were still stuck in the header so the head i had to throw away and buy another set and use the piece of my h pipe and hook it back up with exhaust wrap and go to the local shop and have it welded, it was a B I T C H!
 

STROKED_LX

Member
Jul 5, 2006
43
0
6
Jul 18, 2006
#4
  • Jul 18, 2006
  • #4
try running the bolt in and out several times using that penetrating spray. ive also used the cutting tool when all else failed.
 
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
Jul 18, 2006
#5
  • Jul 18, 2006
  • #5
the nuts are off the bolts, its the bolt that is stuck in the threads of the collector on the header, thats where im running into problems
 

Dark Knight

Founding Member
Feb 1, 2000
2,578
0
0
Chandler, Az.
Jul 18, 2006
#6
  • Jul 18, 2006
  • #6
You can get stud removal tools too..
 
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
Jul 18, 2006
#7
  • Jul 18, 2006
  • #7
where would i get one?
how do they work?
 
J

jerryD

Founding Member
Mar 16, 2000
1,061
0
37
Gladstone, MO
Jul 18, 2006
#8
  • Jul 18, 2006
  • #8
if the part is threaded, you can try to heat it up then attempt to unscrew it. i would go straight to mapp gas, over the propane. if you access to an oxy/acel setup, that is ideal. if not, you may have to remove the header and drill it out.
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
Jul 18, 2006
#9
  • Jul 18, 2006
  • #9
Heat the s.o.b. up good. It will come out with ease.
 
You must log in or register to reply here.

Similar threads

J
Exhaust manifold to Y-pipe nut & stud dimensions?
  • joeybuddy96
  • Jul 7, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
227
SN95 V6 Mustang Tech Jul 9, 2026
joeybuddy96
J
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
543
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
L
Help with 1986 GT 5 Speed Please
  • Lcasada1999
  • Mar 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
402
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
691
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?