• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Frozen Door Locks

  • Thread starter Thread starter theconductor
  • Start date Start date Sep 9, 2014

theconductor

15 Year Member
Aug 9, 2007
337
96
74
Roseville, CA
Sep 9, 2014
#1
  • Sep 9, 2014
  • #1
I replaced the actuators and the doors still seem to be seized. What else may be causing this?

Thanks
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,170
21,338
234
Box behind Walmart
Sep 10, 2014
#2
  • Sep 10, 2014
  • #2
@jrichker

This tag is for one of our members who has a pretty extensive checklist for door locks. He'll get an alert when he logs in to come to this thread.

There are several things that can cause your symptoms. I think he's got them all covered.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 10, 2014
#3
  • Sep 10, 2014
  • #3
1.) Are the locks difficult to operate with a key? If so, a healthy shot of WD40 through the soda straw the comes with the can is a good place to start. Spraying the whole door lock mechanism with WD40 is also a recommended thing to do.

2.) Are you using new replacement actuators or used actuators?

3.) Do the door lock actuators work OK when they are not connected to the door locks? If not, then you have an electrical problem. Disconnect the actuators and use a test light across the contacts in the actuator wiring connector. Toggle the door lock switches each way and make sure the test light works both ways.
 

theconductor

15 Year Member
Aug 9, 2007
337
96
74
Roseville, CA
Sep 10, 2014
#4
  • Sep 10, 2014
  • #4
Noobz347 said:
@jrichker

This tag is for one of our members who has a pretty extensive checklist for door locks. He'll get an alert when he logs in to come to this thread.

There are several things that can cause your symptoms. I think he's got them all covered.
Click to expand...

Thanks, I was looking for his old write up, but it's been removed.

jrichker said:
1.) Are the locks difficult to operate with a key? If so, a healthy shot of WD40 through the soda straw the comes with the can is a good place to start. Spraying the whole door lock mechanism with WD40 is also a recommended thing to do.
Click to expand...

They are both hard to turn with the key and hard to push down by hand.

2.) Are you using new replacement actuators or used actuators?
Click to expand...

New replacement

3.) Do the door lock actuators work OK when they are not connected to the door locks? If not, then you have an electrical problem. Disconnect the actuators and use a test light across the contacts in the actuator wiring connector. Toggle the door lock switches each way and make sure the test light works both ways.
Click to expand...

I never tested them before installing, (silly me) but I can hear clicking when trying to operate them. Same for when I try to use the factory keyless entry.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 10, 2014
#5
  • Sep 10, 2014
  • #5
Sounds like it is WD40 time. Spray the locking mechanism with lots of WD40. Use the red straw to spray inside the lock cylinder.
 

theconductor

15 Year Member
Aug 9, 2007
337
96
74
Roseville, CA
Sep 10, 2014
#6
  • Sep 10, 2014
  • #6
jrichker said:
Sounds like it is WD40 time. Spray the locking mechanism with lots of WD40. Use the red straw to spray inside the lock cylinder.
Click to expand...


Will do it tonight and see what happens!
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,170
21,338
234
Box behind Walmart
Sep 11, 2014
#7
  • Sep 11, 2014
  • #7
I have recently discovered that WD-40 makes a Lithium spray and a Silicon spray.

The silicon spray stays put better than regular WD-40 and is not petroleum based so will not harm seals, coatings, and surfaces.
 
Reactions: theconductor

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,914
1,332
204
a van down by the river
Sep 11, 2014
#8
  • Sep 11, 2014
  • #8
this right here is what you want


 
Reactions: theconductor

theconductor

15 Year Member
Aug 9, 2007
337
96
74
Roseville, CA
Sep 18, 2014
#9
  • Sep 18, 2014
  • #9
Thanks for the help guys. I got the passenger side is working well. The drivers side is being a bitch though.
 

larrym1961

5 Year Member
Dec 18, 2010
570
36
49
Idaho Falls Id
Sep 18, 2014
#10
  • Sep 18, 2014
  • #10
I had my drivers side lock not work with a key for years, even after a new door lock actuator, spraying the lock with WD40, Lock Houdini, Lock Ease, ECT. So I replaced the door locks with new locks and works like a charm now. It is nice to be able to unlock the drivers side door with a key once again.

Even after I took the old drivers side door lock out of the door and tried to turn the lock with the key it would not turn so evidently the lock itself went bad over time.
 
Reactions: theconductor

theconductor

15 Year Member
Aug 9, 2007
337
96
74
Roseville, CA
Sep 18, 2014
#11
  • Sep 18, 2014
  • #11
larrym1961 said:
I had my drivers side lock not work with a key for years, even after a new door lock actuator, spraying the lock with WD40, Lock Houdini, Lock Ease, ECT. So I replaced the door locks with new locks and works like a charm now. It is nice to be able to unlock the drivers side door with a key once again.

Even after I took the old drivers side door lock out of the door and tried to turn the lock with the key it would not turn so evidently the lock itself went bad over time.
Click to expand...

Well, the key turns well now that the lock itself has been lubed. The mechanism is still tight.
 

Micheal Nadeau

Active Member
Dec 30, 2013
258
32
49
Savannah, GA
Sep 18, 2014
#12
  • Sep 18, 2014
  • #12
Keyless Entry!!!
 
You must log in or register to reply here.

Similar threads

N
Power door lock motor Question
  • NYFox
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
276
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 17, 2026
NYFox
N
8
Electrical 5.0 88 Foxbody Door Locks
  • 88VertFox
  • Aug 29, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
257
Fox 5.0 Mustang Tech Sep 2, 2025
Mustang5L5
B
A/C Issues
  • Boats90GT
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
120
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 11, 2026
Mcmahst
T
1990 Convertible door squeaking
  • Tom77
  • Jan 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
418
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 24, 2026
Tom77
T
Electrical Are there any aftermarket door lock actuators that actually work?
  • 89notchDude
  • Nov 24, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
3K
Fox 5.0 Mustang Tech Dec 2, 2024
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?