• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

FRPP Aluminator 2v

  • Thread starter Thread starter MartyMo88
  • Start date Start date Jul 31, 2008

MartyMo88

New Member
Oct 31, 2001
0
0
0
Florida
Jul 31, 2008
#1
  • Jul 31, 2008
  • #1
Has anyone installed a 2v Aluminator? Has anyone experienced any piston slap?
Any comments or suggestions would be greatly appreciated, thanks.
 
J

jprovence

New Member
May 20, 2007
195
0
0
Albany, OR
Jul 31, 2008
#2
  • Jul 31, 2008
  • #2
I have an Aluminator in my garage right now. Got it last week. A bad Mofo is all I can say. I don't think you will deal with piston slap. It does still have production tolerences. It comes with ARP rod bolts, windage try, Cobra oil pump, and rear plate and main seal already installed. You will have to get Mach 1 tensioner guide arms and screw in dowels. I did order the 2v one.
 

MartyMo88

New Member
Oct 31, 2001
0
0
0
Florida
Aug 1, 2008
#3
  • Aug 1, 2008
  • #3
Are those numbers for N/A or blower/turbo? If blower/turbo how much boost? Are you running stock cams? Stock intake manifold? I'm thinking about waiting for BBK's dual stage. What kind of heads are you using? I'm thinking about Patriot or Fox Lake. Thanks.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Aug 1, 2008
#4
  • Aug 1, 2008
  • #4
I've heard nothing but positive comments from the Fox Lake crowd. I hear mixed results from guys who have run the Patriot heads....so take that for what it's worth.
 

MartyMo88

New Member
Oct 31, 2001
0
0
0
Florida
Aug 1, 2008
#5
  • Aug 1, 2008
  • #5
Thanks for the heads up!
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Aug 1, 2008
#6
  • Aug 1, 2008
  • #6
 
J

jprovence

New Member
May 20, 2007
195
0
0
Albany, OR
Aug 1, 2008
#7
  • Aug 1, 2008
  • #7
those numbers where from the stock long block, heads and all. Blower, Procharger p1-sc about 10.5psi.
 

MartyMo88

New Member
Oct 31, 2001
0
0
0
Florida
Aug 4, 2008
#8
  • Aug 4, 2008
  • #8
I would be interested to see your numbers with the Aluminator block when you install it. I have a P1-SC too but I'm thinking about upgrading to the D1-SC.
 
You must log in or register to reply here.

Similar threads

7
1970 Mach 1 voltage regulator
  • 70ivygreen
  • Oct 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
166
1965 - 1973 Classic Mustangs -General/Talk- Oct 27, 2026
Mcmahst
2003-04 Mustang Cobra Brake Conversion
  • Cassiebaebae
  • Oct 8, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
260
1996 - 2004 SN95 Mustang -General/Talk- Oct 24, 2026
Bib36`
H
97 cobra maf sensor help
  • Hopper1979
  • Oct 16, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
154
1996 - 2004 SN95 Mustang -General/Talk- Oct 17, 2026
CAMTWO1070
Engine Are These rings OK?
  • PonyGTrider
  • Sep 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
336
Fox 5.0 Mustang Tech Sep 26, 2026
PonyGTrider
J
Lack of power on acceleration
  • jameshernandez
  • Aug 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
193
1996 - 2004 SN95 Mustang -General/Talk- Sep 6, 2026
jameshernandez
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?