EXTRPR50 said:I have a 95 GT and am not familiar with the 4.6's. So does anyone have the FRPP blower for your cars? If so , how is it? Does it do the trick, or are there better blowers for the money?
Thanx
ps, Im thinkin about going to this setup.
EXTRPR50 said:Yeah, I said I had a 95 to let u know that Im not familiar with 4.6's. I wanted to know about the blower in case I got to a 99-2004 GT. I am still learning about these engines. There dont seem to be alot of inexpensive parts for the 4.6 like you can get with 86-95's. So I was just thinking about going straight to a blower, in one big add on. I like the body style (fender flares) and edges.So I may be in the market soon. Im just testing the waters on performance upgrades
SilverHorse said:I may be wrong but I don't think the FRPP blower fits PI heads. I think I've read that in a few places.
Here we go again. Yet another "Kenne Bell blowers are better than god" post. When will some of you people learn?tjm73 said:For a 4.6 car if you want a positive displacement blower you can walk right past the FRPP kit and go to the Kenne Bell blower - www.kennebell.net. It's a much better blower. And the KB will support 9+ psi quite easily as it is available with an intercooler. The FRPP has a practical limit of about 6-7 psi and has no intercooler set up available.
Gearbanger 101 said:Here we go again. Yet another "Kenne Bell blower are better than god" post. When will some of you people learn?
SilverHorse said:What is up with the 1100 installation kit? What is in that that makes it cost so much? I'd expect an install kit to be just bolts and such.
SilverHorse said:Ahh. They should be more detailed about that. Kind of important stuff and helps to justify the cost.
Gearbanger 101 said:Here we go again. Yet another "Kenne Bell blowers are better than god" post. When will some of you people learn?
In what aspect, overall power? Sure, when you spin the KB’s hard, they’ll walk away from the FRPP pretty good. But what else makes them superior to the FRPP? They’re no more powerful at low boost levels (7psi and below), far more expensive and have no where near proven more reliable than an Eaton blower that’s done so time and time again over the last 15-20 years on various vehicles. The KB is a good blower.....I’ll even go as far to say a great blower, but it’s not the only blower worth having. For you to suggest that someone should skip over the FRPP or others and choose the KB based solely on power is a pretty uniformed statement. If that were the case, wouldn’t it make more sense for them to "step right over" the KB and go with a Novi 2000 or a T-trim? You gotta cover all the bases man.tjm73 said:Wrong. I don't think it's "better than god", but I do think it's better than the FRPP Eaton blower.
Saleen blowers come in both Eaton and Whipple based, depending on the model. You're also forgetting Allen Engine Development and Roush as well as Whipples own line of Twin Screws. There are only two major types of blower. There are Roots (Eaton) and Twin Screws (Auto Rotor, Whipple). Each of these companies makes different kits available with different types of blower (except for Kenne Bell). That leaves a very wide variety of high quality packages to choose from.tjm73 said:He sai dhe was new to 4.6 and was askigfnabout positive displacement blowers. Well that means you can look at FRPP, Saleen and Kenne Bell. No one else makes a kit for the 2V 4.6 that I know of.
No beef at all. I already stated above that they are in fact a great blower. It just annoys me when everything else is dismissed because so many have blindly jumped on the KB bandwagon and no actual factual advice or experience to back it up, just blanketed "one sentence" statements/comments. What’s most important is picking the right tool for the right job. No one blower covers all avenues. Otherwise, they'd all be the same.tjm73 said:And just to gain some perspective, and because I'm curious, what is your meaning behind "When will some of you people learn?"? What's your beef with the KB blower?
Gearbanger 101 said:In what aspect, overall power? Sure, when you spin the KB’s hard, they’ll walk away from the FRPP pretty good. But what else makes them superior to the FRPP? They’re no more powerful at low boost levels (7psi and below), far more expensive and have no where near proven more reliable than an Eaton blower that’s done so time and time again over the last 15-20 years on various vehicles. The KB is a good blower.....I’ll even go as far to say a great blower, but it’s not the only blower worth having. For you to suggest that someone should skip over the FRPP or others and choose the KB based solely on power is a pretty uniformed statement. If that were the case, wouldn’t it make more sense for them to "step right over" the KB and go with a Novi 2000 or a T-trim? You gotta cover all the bases man.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?