frusterated with exhaust

Couple questions first off,you say mid-pipe,is it an H or X?

Is it one piece or two?

And last do you have stock hangers?

Dont get frustrated man....keep wrenching on your car.....! Seems like an honest mistake , you just got the wrong set up from the mid-pipe back . Seems like an exhaust shop can help you with a simple fix but you can also do it yourself . There are aftermarket "dumps" out there which you can easily install yourself . It also depends if you want tailpipes at all , you could just cut the tailpipes after the muffler and add dumps there . Or just selll your current cat-back and get some of these:

1979-95 Mustang Pro Dumps from Mustang Depot

I saw some cheap ones on Ebay which would work but cant post the link , just search "2 1/2'' Exhaust turn downs tail pipes clamps tips" on E-bay and you'll see them . But here is a pic :





or lastly find a used stock or aftermarket cat back specificly for a GT .

tyler08 said:

its an off road H pipe and its one piece. I had to weld new hangers on the H pipe to fit the stock set up.

Click to expand...

Its possable if you flip it around it might fit better,some H-pipes are "arched" in the center.

If not then it would be a issue of it being too long,pushing the tip up into the bumper,if you really like the tail pipes then just work it out and keep them.

Exhaust is just piping,lol