Fuel cutoff/ filler tube

P

pimpstang18

New Member

Sep 22, 2004

43

0

0

FL

May 12, 2009

#1

• May 12, 2009

• #1

recently replaced the filler tube grommet on a 2000 stang. after putting it back together i couldn't fill up the tank without it shutting off the pump every 2 seconds. after doing some research apparently i messed up he valve at the end of the filler tube which is there to prevent syphoning/ gas spilling in the event of a rollover...

my question is can i just bust off this stupid "safety" valve instead of replaceing the entire filler tube? will there be any other problems resulting from this, other than having gas spill in the event of a rollover?

 

J

jlds91389

New Member

Feb 1, 2009

241

0

0

Orange Tx

May 12, 2009

#2

• May 12, 2009

• #2

lol its funny that you posted this. when i changed my gromet that little safety thing snapped off like a twig. that was like 4 months ago no problems since

 

Flghtmstr1

Member

Mar 31, 2005

572

4

19

Springfield, PA

May 13, 2009

#3

• May 13, 2009

• #3

Dying in a fire is a significant problem as far as I'm concerned...

 

squeak93

15 Year Member

Jun 2, 2005

2,282

370

164

Joplin, Missouri

May 13, 2009

#4

• May 13, 2009

• #4

Fill the tank slower...... Don't take the SAFETY valve off.... its obviously there for a reason.

 

P

pimpstang18

New Member

Sep 22, 2004

43

0

0

FL

May 16, 2009

#5

• May 16, 2009

• #5

can't really fill the tank slower, as soon as i pull the pump it spurts out a small stream of gas, then shuts off, recently it's been spilling out of the top of the tube because it won't go past this stupid cut off valve.....not really planning on rolling my stang so i don't think i'm going to die in a fire

haven't actually snapped it off yet though, i think it might just be jammed, i'm going to take it apart again today and try to dislodge it first, i was just wondering it it would throw a code or leak if i took it off.....thanks

 

P

pimpstang18

New Member

Sep 22, 2004

43

0

0

FL

May 16, 2009

#6

• May 16, 2009

• #6

just in case, does anyone know where i can get a replacement one for cheap?

 

B

bdcardinal

tree hugger

Jun 10, 2003

3,612

16

69

santa barbara, CA

May 16, 2009

#7

• May 16, 2009

• #7

its relatively inexpensive from the dealer.

 

P

pimpstang18

New Member

Sep 22, 2004

43

0

0

FL

May 16, 2009

#8

• May 16, 2009

• #8

$190 from dealer....was really looking for a used one prefferably

 

P

pimpstang18

New Member

Sep 22, 2004

43

0

0

FL

May 25, 2009

#9

• May 25, 2009

• #9

pulled back apart, turns out the cutoff valve is a little floater inside a metal cage, guess i bent the surrounding cage a little and the valve got stuck in the closed position. all i had to do was stick a screw driver in and open up the cage a little to free it up....so the moral is be careful when removing and replaceing this tube because the fuel cutoff valve is kind of sensitive, no big deal....thanks for the help guys