fuel injectors

lxwants12's

New Member
Sep 22, 2004
506
0
0
hey guys im going to buy some fuel injectors off ebay and i was wondering if the fuel injectors off of new mustangs fit on my 89...cause some of the people on ebya selling them are stationg...87- 2003 fuel injectors....when the fuel injectors themselves actually came off a 01 or 02....will they fit on my car?? any help would be great
 
If you mean the stock type injector, Borg-Warner sells a "seal kit" that includes the o-rings and pintel cap and cost a little over $2 for each injector. If you mean the caps for the newer "disc" type injectors (most of those in the pic above), I have not found a supplier for them yet.
 
Fuel injector seal kits with 2 O rings and a pintle cap (Borg-Warner P/N 274081) are available at Pep Boys auto parts. Cost is about $2.74 per kit. The pintle caps fit either injectors with a pin sticking out the injector end or 4 with more tiny holes in the injector end. The following are listed at the Borg-Warner site ( http://www.borg-warner.com ) as being resellers of Borg-Warner parts:

http://www.partsplus.com/ or http://www.autovalue.com/ or http://www.pepboys.com/ or http://www.federatedautoparts.com/

Most of the links above have store locators for find a store in your area.
 
jrichker said:
The pintle caps fit either injectors with a pin sticking out the injector end or 4 with more tiny holes in the injector end.

When I bought these kits before, I did not find this to be true. The kit only contains the pintel cap and not the "disc" 4-hole cap. The disc injectors also do not use the plastic spacer contained in the pintel kit.