• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

fuel pressure and dump codes

  • Thread starter Thread starter noslow1986
  • Start date Start date May 12, 2007
N

noslow1986

New Member
Mar 25, 2006
274
0
0
oswego Il
May 12, 2007
#1
  • May 12, 2007
  • #1
i check the fuel it idles at 35 psi .when i put more throttle and hold it at 2000 rpms the pressure goes ups to 40 psi then drops back to 35psi but i still have the throttle at 2000 shouldnt it stay at 40 why a drop in pressure
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 12, 2007
#2
  • May 12, 2007
  • #2
Once you level out the pedal, the FPR starts passing more fuel (than it was when you were opening the throttle, thus decreasing manifold-vac per time).

It sounds about right IMHO.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
May 12, 2007
#3
  • May 12, 2007
  • #3
The engine makes vacuum anytime it is running. The FPR is connected to the intake manifold to read the vacuum. For every 2 inches of vacuum that is in the intake manifold, the fuel pressure is decreased by 1 PSI.

That means at idle with 20 inches of vacuum you will see 28-30 PSI fuel pressure. At 2000 RPM cruse with 15 inches of vacuum you will see 32-34 PSI fuel pressure.

The same thing holds true for pressure inside the intake manifold. For each 1 PSI of boost, the FPR increases the fuel pressure by 1 PSI, as long as the fuel pump is up to the job.

The increase with pressure and decrease with vacuum insures that the fuel injectors always deliver the same volume of fuel at 100% duty cycle. This allows the computer to vary the injector pulse width to richen or lean out the air fuel ratio.
 
N

noslow1986

New Member
Mar 25, 2006
274
0
0
oswego Il
May 12, 2007
#4
  • May 12, 2007
  • #4
i got a canister purge code i deleted it the unit thou should i be worried about that. and i have a 1 inch spacer inbetween upper and lower intake and in the back its wet. i pulled my upper intake off and could smell fuel is this normal. i think im going to have someone look at it cause im tired off screwing with it
 
You must log in or register to reply here.

Similar threads

M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
537
1996 - 2004 SN95 Mustang -General/Talk- Aug 9, 2026
JohnKay
J
J
Having fuel issues
  • Jbands2v
  • Nov 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
80
SN95 4.6L Mustang Tech Nov 2, 2026
LILCBRA
D
Fuel Erratic Fuel Pressure 1985 GT
  • DienstXIV
  • Jan 14, 2026
  • Fox 5.0 Mustang Tech
Replies
16
Views
966
Fox 5.0 Mustang Tech Jan 16, 2026
AeroCoupe
T
Fuel P0193 on a 2003 3.8 v6
  • Treemaster5000
  • Aug 18, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
126
SN95 V6 Mustang Tech Aug 18, 2026
Treemaster5000
T
J
Fuel Fuel Pressure Issue
  • justadude07
  • May 12, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
491
Fox 5.0 Mustang Tech May 12, 2025
justadude07
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?