The engine makes vacuum anytime it is running. The FPR is connected to the intake manifold to read the vacuum. For every 2 inches of vacuum that is in the intake manifold, the fuel pressure is decreased by 1 PSI.
That means at idle with 20 inches of vacuum you will see 28-30 PSI fuel pressure. At 2000 RPM cruse with 15 inches of vacuum you will see 32-34 PSI fuel pressure.
The same thing holds true for pressure inside the intake manifold. For each 1 PSI of boost, the FPR increases the fuel pressure by 1 PSI, as long as the fuel pump is up to the job.
The increase with pressure and decrease with vacuum insures that the fuel injectors always deliver the same volume of fuel at 100% duty cycle. This allows the computer to vary the injector pulse width to richen or lean out the air fuel ratio.