• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum

Fuel pressure on 03 cobra fluctuating between 30-40psi

  • Thread starter Thread starter IMPORTSMOKER
  • Start date Start date Jun 8, 2006

IMPORTSMOKER

Member
Feb 16, 2004
201
0
16
RIVERSIDE, CA
Jun 8, 2006
#1
  • Jun 8, 2006
  • #1
i just installed a bbk liquid filled fuel press gauge on the fuel rail at the shrader valve on my 03 cobra....but it seems that my fuel pressure is fluctuating and bouncing around between 30 and 40 psi....is this normal?? i think there is something wrong here.....when i dynoed the car a few weeks ago ..it was rich all the way to the top...any suggestions?
 
U

Uncle Meat

Banned
Jun 13, 2002
0
1
0
Prattville, Alabama
Jun 9, 2006
#2
  • Jun 9, 2006
  • #2
As far as being rich all the way up, that's normal for all 03 & 04 Cobra's running the stock factory tune. It's Fords way of playing it safe. As for the bouncing fuel pressure I couldn't tell you.

U.M.
 

Don 95Vert

Founding Member
Oct 1, 1999
1,091
1
39
Delaware, OH
Jun 9, 2006
#3
  • Jun 9, 2006
  • #3
It's probably normal - the PCM attempts to keep pressure drop across the injectors steady, not fuel pressure. If you have a datalogger log that and see what it is, chances are it'll be pretty steady.

It is NOT normal for the car to be rich at idle and part throttle...
 
U

Uncle Meat

Banned
Jun 13, 2002
0
1
0
Prattville, Alabama
Jun 9, 2006
#4
  • Jun 9, 2006
  • #4
Don 95Vert said:
It is NOT normal for the car to be rich at idle and part throttle...
Click to expand...
Don, he stated when he dyno'ed it was rich all the way to the top. A/F readings from the dyno are measured and recorded at WOT, not at idle or part throttle, so in this instance being rich all the way to the top is inherent in the stock 03/04 Cobra ECM calibrations. You are correct though that at part throttle and idle conditions the ECM should be keeping the A/F ratio at a stoic (14.7).

U.M.
 

IMPORTSMOKER

Member
Feb 16, 2004
201
0
16
RIVERSIDE, CA
Jun 9, 2006
#5
  • Jun 9, 2006
  • #5
What should the stock fuel press be at idle? and should it be a dead on steady reading? only reason im concerned is that im new to the 4.6, my old 5.0 would be a steady 40psi on the gauge at the same location on the fuel rail....
 

Dr. Wu 2000

New Member
Feb 16, 2004
554
0
0
Eastern, Pa.
Jun 9, 2006
#6
  • Jun 9, 2006
  • #6
I have an Autometer fuel pressure gauge and I see around 30psi or so at idle with a bounce here or there....I think a bit of fluctuation is normal, a few psi.
 
You must log in or register to reply here.

Similar threads

M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
159
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2026
Mhaley2006
M
C
03 Cobra Low Fuel Pressure
  • CTsnake_03
  • Mar 17, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
262
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
CTsnake_03
C
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
916
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
133
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
A
Resolved Fuel pressure high at 52 new FPR same thing
  • afjLX
  • Dec 28, 2024
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
90
Views
4K
Fox 5.0 Mustang Tech Jan 11, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?