• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Fumes leaking into cab from e-brake/console area

  • Thread starter Thread starter TauMau
  • Start date Start date Jan 18, 2011

TauMau

New Member
Jan 14, 2011
8
0
0
Jan 18, 2011
#1
  • Jan 18, 2011
  • #1
Hey guys,

After driving my 86 GT T-Tops for awhile and parking, I'll begin getting smoke coming out of the E-Brake lever opening. Any ideas? It doesn't appear to be an exhaust leak because it's dark smoke, and my exhaust doesn't have anything like that.

It's not coming from the shifter housing either, I know that.

What's down there that could be leaking onto the exhaust and burning up? Maybe a trans leak? And what seals that area from outside fumes?

Thanks for any help
 

bmo37

Founding Member
Jun 27, 2001
2,368
2
46
New Jersey
Jan 18, 2011
#2
  • Jan 18, 2011
  • #2
speedo cable where it mates gear on trans, or rear main seal on back of the engine would be my two guesses.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,366
18,112
224
Massachusetts
Jan 18, 2011
#3
  • Jan 18, 2011
  • #3
There is a seal where the shifter is and where the e brake cable passes through that seal out fumes. If they are missing, that's your problem.

Of course, doesn't solve the smoke issue
 

TauMau

New Member
Jan 14, 2011
8
0
0
Jan 20, 2011
#4
  • Jan 20, 2011
  • #4
Cool thanks for the hints. Pretty sure it's my trans leaking somewhere. Good to know about the cable seal.
 

TauMau

New Member
Jan 14, 2011
8
0
0
Mar 6, 2011
#5
  • Mar 6, 2011
  • #5
It was the driveshaft output seal at the back of the trans. Changed it today...haven't had a long enough drive to verify, but should have fixed my problem. Thanks again for the help.

For future reference: The easiest way to change the seal is unbolt the driveshaft at the third member (4 bolts), then slide it off the trans. Removing the seal is a bit tricky and frustrating...if you can get a thin screwdriver or similar tool in there and start to work it out that seems the only way to go about it. If any VW/Porsche/off-roaders out there are doing it, use the CV cage off a 930 to displace the force evenly across the seal when pounding it in...fits perfectly around it. Good luck to anyone doing this in the future.

I got my seal from LMR

http://www.latemodelrestoration.com/item/LRS-7052A/83-95-Mustang-T-5-AOD-Tailshaft-Seal
 
You must log in or register to reply here.

Similar threads

A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
Engine Gas in my oil
  • limp
  • Jun 15, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
2K
Fox 5.0 Mustang Tech May 16, 2026
Mindseye007
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Progress Thread Komo's 1990 GT - Parts Gathering Purgatory & Home Remodel
  • gkomo
  • Sep 23, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 104 105 106
Replies
2K
Views
90K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Yesterday at 2:37 PM
gkomo
S
Smoking near exhaust manifold
  • StallionMax
  • Nov 6, 2022
  • SN95 4.6L Mustang Tech
Replies
2
Views
1K
SN95 4.6L Mustang Tech Nov 7, 2022
StallionMax
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?