Seems today is not my day. I've suddenly developed some interior lighting issues in my stang, and I can't figure them out. I was working on my fuel pressure gauge and isolator, because the isolator got stuck wide open. After getting that all dealt with, I put it back together, and noticed my gauge lights weren't coming on for any gauge or the tach. I then noticed that my instrument lights were out too. To make matters worse, My headlight switch seems to be messed up, because the door chime only works when the switch is 3/4 pressed, not all the way in. Also, the fog lights and corner lights don't work unless the switch is only 3/4 in. On top of all of that, my "amp" battery light stays on in the cluster, even though my autometer says I've got plenty of juice. I've had multi-function switch problems in the past, and a friend did a little wiring mod for my foglights so I wouldn't cook another switch. Now it seems like the switch went anyway. If anyone has any clue what I need to do here, help me out. I already have another switch on order because I have a feeling that's the issue.