Future Mods

Atrius

New Member
Jan 27, 2004
11
0
0
Tampa, Fl
IF you read my earlier post i just got a new mustang. Its a 4.6L V8 1996 Mustang GT Convertible, and no mods were done by the previous owner.

Some one gave me the advice to get Full length sub-frame connectors, can anyone tell me what these do?

Also I would like to compile a list for future modifications that would either A.make the car look cooler or B. make the car run better. As I keep reading from the boards i'll get to understand more but until then can i get suggestions on what to do.
 
full length SFC's stiffen the car, and on a convertible they help out a lot according to most people.

as for other mods, here are some ideas:
PI Heads
Gears (4.10's)
Shifter
Exhaust
Pullies
Timing Adjuster
Plenum
Throttle Body
MAF
 
Theres a lot of good stuff in there but i dont know where to start, i suppose i'll go with the full length sfc's but my real problem is not really knowing what it all does, and that will just take research on my part.
 
Atrius said:
Theres a lot of good stuff in there but i dont know where to start, i suppose i'll go with the full length sfc's but my real problem is not really knowing what it all does, and that will just take research on my part.

Basically connects the two frames together. You need to weld them in. Connecting them makes the frame of the car stronger and better built, and should help quiet rattles.