galeri restrictor oil in 302 block location picture??

jesusmanuel_fy · Feb 1, 2008

hello friends I hope esten good or wanted to know if some has a grafico or a photo o picture of the location of restrictor of oil in a 302 motor the block efi

my mustang is a 1968 an the engine in this moment is a 347 stroker and my Camshafts is solid and used restrictor oil??? and what is your location please in picture o photo thanks

i not speck english very much tahnks

black87ttop · Feb 1, 2008

wow, just wow

Gearbanger 101 · Feb 1, 2008

I'm not 100% sure what you're asking, but this is what the top end of a 302 short block looks like if it helps answer your question any?

...and guys, be nice. He's from Venezuela and doesn't speak english very well!

vristang · Feb 1, 2008

jesusmanuel_fy said:
i not speck english very much tahnks

I've seen worse posts from guys who grew up here in the states... you're doing fine

Why do you want to run an oil restrictor?
Unless you're doing something REALLY crazy with this motor, I doubt you need one anywhere in a 302/351w...

good luck,
jason

PUNISHER RACING · Feb 1, 2008

I thought Ryan had a new screen name!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!LOL

PUNISHER RACING · Feb 1, 2008

The restrictors you speak of are meant to keep the majority of the oil in the bottom end. They go in place of your existing soft plugs behind timing chain (there are 3 of them) press in style. You will need to get the block machined to accept threaded plugs instead of the press in style k! This will let the oil that enters the lifter bore journals empty back into the pan sooner.
http://www.mustangmonthly.com/howto/mump_0706_boss_302_engine_build/photo_12.html
http://www.speedwaymotors.com/p/3221,137_Oil-Restrictors.html

vristang · Feb 1, 2008

PUNISHER RACING said:
The restrictors you speak of are meant to keep the majority of the oil in the bottom end. They go in place of your existing soft plugs behind timing chain (there are 3 of them) press in style. You will need to get the block machined to accept threaded plugs instead of the press in style k! This will let the oil that enters the lifter bore journals empty back into the pan sooner.
http://www.mustangmonthly.com/howto/mump_0706_boss_302_engine_build/photo_12.html
http://www.speedwaymotors.com/p/3221,137_Oil-Restrictors.html

Sounds like you are talking about replacing press-in plugs with threaded plugs... Nothing about where the restrictors go....

Sticking to my original response...
Unless you are building something for a very specific application, then avoid oil restrictors (assuming 302/351w).

jason

jesusmanuel_fy · Feb 1, 2008

Hello friends in mecanical general indicate that on having used Camshafts flat tape mechanical debit To be used restrictor oil for de best lubrication.

Though they have commented to me that in so small engines it(he,she) is not recommended usarce as what I have the doubt use so much of them like of the location where they go for that I buy those of ford racing and the instructions that I bring are not understood by me.

thanks friend in this picture view a ubication of restrictor http://www.mustangmonthly.com/howto/.../photo_12.html

thanks

lang williams · Feb 1, 2008

I have heard of oil restricters in cleveland motors but not windsor motors. the cleveland motors would pump so much oil to the cam the crank would go dry (I think)

Rick 91GT · Feb 2, 2008

It is a common practice to install restrictors on solid or mech roller set-ups since you do not need all the oil to the lifters or valve train.

Since the stock blocks are not priority main oiling what Punisher posted above sounds correct, on a priority main block like a DART you put the restrictor in the rear oil feed usually .080"-.100" depending on the set-up.

jesusmanuel_fy · Feb 2, 2008

thanks my friends please other question this Camshafts

http://store.summitracing.com/partdetail.asp?part=CCA-31-641-5&view=16383&N=700+115

is my camshafts for my 347 and this camshafts is good for 200hp nos??? soport this camshaft.

thanks

galeri restrictor oil in 302 block location picture??

jesusmanuel_fy

New Member

black87ttop

Member

Gearbanger 101

Straight Outta Locash

vristang

PUNISHER RACING

Active Member

PUNISHER RACING

Active Member

vristang

jesusmanuel_fy

New Member

lang williams

New Member

Rick 91GT

Mustang Master

jesusmanuel_fy

New Member

Similar threads

galeri restrictor oil in 302 block location picture??

New Member

Member

Straight Outta Locash

Active Member

Active Member

New Member

New Member

Mustang Master

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency