Gas tank leak...

S

StangLover159

New Member

Apr 10, 2004

47

0

0

Sep 22, 2005

#1

• Sep 22, 2005

• #1

Ok so I was @ the gas station the other day filling up with 3 sumthin gas, and right when I was done filling up I looked down and there was my money spilling all over the ground so i got her home, and siphoned the gass out till it stopped leaking. It's coming from where the spout connects to the tank, is there a gasket there that could need replacing or would it be something more complicated? also...whats the difference between a 4cyl gas tank and a v8 gas tank?

 

The Fox

New Member

Mar 30, 2005

354

0

0

Port Elizabeth

Sep 22, 2005

#2

• Sep 22, 2005

• #2

mine start leaking due to rust hole from the plastic cover retaining water. So I dropped the tank and let the hole dry and had my way with some JB weld. And then did my battery relocation

 

sheff2720

New Member

Nov 30, 2003

182

0

0

Horsham, PA

Sep 23, 2005

#3

• Sep 23, 2005

• #3

there is a rubber seal that goes between the filler neck and the gas tank.. you can pick it up at a ford dealer for a few dollars.. its an easy fix too.. wait until there isnt much gas left in the tank and jack up the rearend of the car, you'll see where it leaking from right away.. just unbolt the filler neck and wiggle it out, replace the gasket, and then put the filler neck back in.. you may have to lower the tank alittle bit, i dont exacly remember, but if you do thats just 2 bolts where the straps meet the body of the car.. just make sure you suport the tank with something (like another jack) if you have to lower it down.. i had the same problem a few months ago and it took less than a half hour to fix.. good luck

 

9T3SVT

New Member

Apr 18, 2004

84

0

0

Sep 23, 2005

#4

• Sep 23, 2005

• #4

Sounds like the filler neck grommet ford part number F4ZZ-90-72-DA

 

B

BPH90LX

New Member

Apr 18, 2005

19

0

0

Sep 23, 2005

#5

• Sep 23, 2005

• #5

I messed that seal up when i put in the new fuel pump, it was really easy to replace and like 20 bucks and in stock at the local ford dealer

 

9T3SVT

New Member

Apr 18, 2004

84

0

0

Sep 23, 2005

#6

• Sep 23, 2005

• #6

BPH90LX said:

I messed that seal up when i put in the new fuel pump, it was really easy to replace and like 20 bucks and in stock at the local ford dealer

Click to expand...

Anytime you buy a part from the dealer ask them this "Is that the best price you can give me?" I saved 7 bucks just asking. I always ask and they usually give me a little off.

Give it a shot, the worst they could say is "Yes"

 

281pony

Active Member

Aug 31, 2003

2,681

2

46

Oly, WA

Sep 23, 2005

#7

• Sep 23, 2005

• #7

that is true.

the damn ford dealership tried to charge me 120 bucks for a fuel level sending unit. i was like wtf? you said 86 on the phone, then hes like, oh yea we can do that.

kinda shady if you ask me. people who come in and dont know any better dont get the lower end of the scale i doubt

 

jaymac

New Member

Feb 18, 2004

995

0

0

Northern Mass

Sep 23, 2005

#8

• Sep 23, 2005

• #8

:damnit: I paid $34 for my grommet at Ford

 

D

dregon365

New Member

Sep 20, 2005

1

0

0

29 palms, ca

Jan 10, 2006

#9

• Jan 10, 2006

• #9

My "fox box" was leaking from the same place, at the filler neck there is a gasket where it goes into the tank. replace it you will be fine. cheap price for one at http://www.texasmustang.com/ around $25.00 hope my info can help you.

 

mustangphil

Founding Member

Jul 9, 2002

21

0

48

No longer The Beach

Jan 10, 2006

#10

• Jan 10, 2006

• #10

I just had that same problem. Fixed it last night. Paid $29 for the grommet, which I think is for a simple piece of rubber. I just dropped the tank. Sucks that I had to syphon out 10 gallons of fuel.

 

J

jerry beach

Founding Member

May 20, 2002

2,671

0

46

Ocala,FL

Jan 10, 2006

#11

• Jan 10, 2006

• #11

At first I thought mine was leaking from the filler neck grommet. Upon further inspection, I found that it was seaping out of the seam where the two halves of the tank are welded together (if you dare call that welding). I had to replace the tank.

 

stangjunkie

New Member

Nov 15, 2004

381

0

0

Jan 10, 2006

#12

• Jan 10, 2006

• #12

yup mine did the same only it only leaked when i made a left hand turn cuz the gasket was toast anyway yeah i ended up payin 12 bucks for mine and it was a cakewalk... if you remember to take all of the gas out of the tank otherwise when you undo that last strap you get to find out how much the gas actually weighs... this is not fun....

 

Y

yogi_stvl

Member

Aug 26, 2004

53

0

7

Sacramento

Jan 10, 2006

#13

• Jan 10, 2006

• #13

I have the same problem with my gromet. Order it off www.50resto.com today...I just bought if from ford for $36 and I found it on 50 resto for $12. Ford Dealerships suck

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Jan 10, 2006

#14

• Jan 10, 2006

• #14

yogi_stvl said:

I have the same problem with my gromet. Order it off www.50resto.com today...I just bought if from ford for $36 and I found it on 50 resto for $12. Ford Dealerships suck

Click to expand...

The 12 dollar one is for a '98. Or is there no real difference?

 

stangjunkie

New Member

Nov 15, 2004

381

0

0

Jan 10, 2006

#15

• Jan 10, 2006

• #15

i guess mine was on a 94 v6... but its the same gas tank setup

 

Y

yogi_stvl

Member

Aug 26, 2004

53

0

7

Sacramento

Jan 10, 2006

#16

• Jan 10, 2006

• #16

HISSIN50 said:

The 12 dollar one is for a '98. Or is there no real difference?

Click to expand...

there's no difference. I got the one from ford and matched the part number with the one I got online. It fit perfect anyway.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Jan 10, 2006

#17

• Jan 10, 2006

• #17

So why is there the big price difference (the alpha numeric parts numbers are a letter off for the different versions)? I just want to make sure because 12 bucks is a very good deal on those, if it fits properly.

 

Y

yogi_stvl

Member

Aug 26, 2004

53

0

7

Sacramento

Jan 10, 2006

#18

• Jan 10, 2006

• #18

you've bought parts from a Ford dealership right? It's always overpriced but you can always find what your looking for. The gromet fits pefectly in my 89. The two do look slightly different but not in anyway that would affect anything. The outside rubber lip is a little thicker but the entrance hole is the same size. a lot of stuff on 50resto is really set at a good price. I've put a lot of my car together with products from 50resto. I was just didn't have time to wait for it to come in the mail.