looks like you didn't calibrate the oil pressure needle correctly, unless it always runs that high
What you can do instead is take off the needles and paint them red like I did. But the PITA part is to calibrate them, its actually very simple just make note of where the needles are before you take off the needles. To change the color to red you need to sand off the yellow on the bottom of the needle and paint it red or whatever. you also need to break the bottom of the black part so you can expose the whole needle. It will still work without the bottom black part. You will understand what I'm saying if you decide to do it this way.
this is a 95 mustang cluster with the needles painted laser red. Its my car.
Taht is BRIGHT, Can you adjust the dimming level?
I think you can a little. It's not that bad in person. I keep it turned up.
Super Bright LEDs - Miniature Wedge Base Bulbs
194/168 sockets (same socket, there are just two different numbers that describe it for whatever reason)
WLED-x5 is the bulb that works the best.
thats what I used
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?