T Tayohs 95Gt New Member Aug 26, 2004 72 0 0 Findlay ohio 45840 Sep 23, 2005 #1 Sep 23, 2005 #1 i have a vaccume gauge.. and i need to find where to hook it up under the hood to check for leaks.. do u know where i can hook it up at? thanks matt
i have a vaccume gauge.. and i need to find where to hook it up under the hood to check for leaks.. do u know where i can hook it up at? thanks matt
RIO5.0 15 Year Member Feb 16, 2001 6,892 8 128 N.H. Sep 23, 2005 #2 Sep 23, 2005 #2 Just like so...Tap into the FPR line with a Tee. Edit....I thought you were running a gage feed line.... I usually just undo the FPR for a moment as use that feed....
Just like so...Tap into the FPR line with a Tee. Edit....I thought you were running a gage feed line.... I usually just undo the FPR for a moment as use that feed....
HISSIN50 "How long does it take to get help in here? 15 Year Member Nov 29, 1999 31,179 34 129 Sep 23, 2005 #3 Sep 23, 2005 #3 A tee on a vac-port-line off the vac-tree also works. If using a Mitivac, one can undo both ends of a hose and plug one end and pull vac on the other end and see if it holds pressure. Good luck.
A tee on a vac-port-line off the vac-tree also works. If using a Mitivac, one can undo both ends of a hose and plug one end and pull vac on the other end and see if it holds pressure. Good luck.
mo_dingo 20+ Year Stangneter Aug 26, 2003 3,031 2 58 Tucson, AZ Sep 23, 2005 #4 Sep 23, 2005 #4 Just disconnect the line off of the FPR, and leave it off. Connect the tester to the vacuum tree where the FPR line was and see what you have. Scott
Just disconnect the line off of the FPR, and leave it off. Connect the tester to the vacuum tree where the FPR line was and see what you have. Scott