gauge hook up help

[Tayohs 95Gt]

i have a vaccume gauge.. and i need to find where to hook it up under the hood to check for leaks.. do u know where i can hook it up at? thanks

matt

 

[RIO5.0]

Just like so...Tap into the FPR line with a Tee.

Edit....I thought you were running a gage feed line.... I usually just undo the FPR for a moment as use that feed....

 

[HISSIN50]

A tee on a vac-port-line off the vac-tree also works.

If using a Mitivac, one can undo both ends of a hose and plug one end and pull vac on the other end and see if it holds pressure.

Good luck.

 

[mo_dingo]

Just disconnect the line off of the FPR, and leave it off. Connect the tester to the vacuum tree where the FPR line was and see what you have.
Scott