Gauge Install Q?

blacknblue2002

Member

Jul 3, 2005

159

2

18

Va Beach, Va

Mar 27, 2006

#1

• Mar 27, 2006

• #1

So I was thinking about buyin some new gauges to accompany the new S/C...but was wondering what level of difficulty gauge installs are. I was going to go with the A-pillar, w/ boost, A/F, and Oil temp. I'm not as worried about the electric stuff as much as the possibility of drilling into my interior, or ripping apart my dash...any comments?

 

SaleenGT2001

Well-Known Member

Jul 18, 2005

2,811

4

58

Four Oaks NC

Mar 27, 2006

#2

• Mar 27, 2006

• #2

very easy install. all you have to drill into is the a pillar.

 

BennyBlown2v

New Member

Dec 9, 2004

1,233

1

0

Carmel, INdiana

Mar 27, 2006

#3

• Mar 27, 2006

• #3

For mechanical boost gauge you have to drill a small hole (3/8" i believe) in the firewall for the tubing. I put mine right above the gas pedal opening, put in the supplied gromet from Autometer, then filled it with silicone. Also I just punched the opening up to near 3/8", then drilled it through to the interior (from the engine bay) going through the thin insulation layer and plastic.

 

SaleenGT2001

Well-Known Member

Jul 18, 2005

2,811

4

58

Four Oaks NC

Mar 27, 2006

#4

• Mar 27, 2006

• #4

i just went thru the rubber boot in the firewall. you do not have to drill anything unless you want to