Gears In

Guero

Active Member

Oct 11, 2005

2,148

0

47

Dec 28, 2005

#1

• Dec 28, 2005

• #1

And what a difference i cant get traction in first and most of second. im in Nogales Sonora i paid 75 bucks. no whining or nothing. going to track on Friday. dam this is tight.

 

Suspect

Active Member

Aug 25, 2004

256

0

26

GA.

Dec 28, 2005

#2

• Dec 28, 2005

• #2

really? that much of a difference? usually everyone says its the 1st thing to do, but beleive it or not i have stock gears. prolly one of few. i figure to wait and see which direction im going b4 i pick a gear. i change my mind on setups all the time. should i install a gear and get it over with or do like im doing and wait?

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Dec 28, 2005

#3

• Dec 28, 2005

• #3

i got mine two weeks ago. worth every penny. i cant wait to go back to the track. they open back up on wed. im hoping to improve on my 60' time. i got a new clutch and its much easier to drive on the street so im hoping for at least a 2.0 and low 13's

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Dec 28, 2005

#4

• Dec 28, 2005

• #4

Damn straight...best mod going.. How you like the mid range hit now...

Suspect...get some 373s and have at it...times a wasting...they really are worth the money....I went 355s for 2 yrs then went to 373s....love em...

 

Zero Signal

Active Member

Feb 24, 2003

2,633

2

46

Tucson, AZ

Dec 28, 2005

#5

• Dec 28, 2005

• #5

I can't believe you got your stang worked on in Nogales I just don't think I can trust anyone down there. Update us on your new timeslip.

 

loudpedal99

New Member

Aug 30, 2005

160

0

0

ND

Dec 28, 2005

#6

• Dec 28, 2005

• #6

You think 1st and 2nd are bad now, wait until your H/C/I

 

Guero

Active Member

Oct 11, 2005

2,148

0

47

Dec 28, 2005

#7

• Dec 28, 2005

• #7

this guy knows my grandpa, hes really good. i was nervous to at first. then my granpa sdaid he´ll pay for a new diffi if he ****ed it up.

 

Guero

Active Member

Oct 11, 2005

2,148

0

47

Dec 30, 2005

#8

• Dec 30, 2005

• #8

i bought the speedo gear now how do i change it?

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Dec 30, 2005

#9

• Dec 30, 2005

• #9

On the drivers side, pull the plug, undo the bolt and pull the VSS out...you'll see when you get it out how to swap the gear, circ-clip or something like that holds it in, its been awhile since I did it...Way tit though....10 minute job...

 

Guero

Active Member

Oct 11, 2005

2,148

0

47

Dec 30, 2005

#10

• Dec 30, 2005

• #10

thanks looks easy. can i change my mileage by playing with that?

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Dec 30, 2005

#11

• Dec 30, 2005

• #11

Not sure on that one??? If you don't change it you'll be racking up more miles tho...
Your looking for something to reverse miles no doubt???...

 

Guero

Active Member

Oct 11, 2005

2,148

0

47

Dec 31, 2005

#12

• Dec 31, 2005

• #12

yep i want to put it on 2300 since i put that many miles since i bought it

 

94gts

Member

Jul 4, 2004

873

0

16

Carmel, New York

Dec 31, 2005

#13

• Dec 31, 2005

• #13

Guero said:

yep i want to put it on 2300 since i put that many miles since i bought it

Click to expand...

i would really like to do that for when i put my new motor in next spring

 

OrangeMustangGt

Founding Member

Mar 7, 2002

1,976

0

36

Cape Cod, MA

Dec 31, 2005

#14

• Dec 31, 2005

• #14

i dont think they go backward, also the gear for the speedo, i beleve is white, but it will eventually get chewed up, and the plastic teeth go in to your tranny. I had the same problem, and found out about the plastic bits when i rebuilt my t-5. I took off the tailshaft and put the correct drive/driven gears

 

DarkProphet

Founding Member

Aug 19, 2002

391

0

0

Quakertown, PA

Dec 31, 2005

#15

• Dec 31, 2005

• #15

Suspect, Im still rocking stock gears too. I cant wait to get gears in my car, though i will deffinatly miss doing 100 at like 2k

 

Guero

Active Member

Oct 11, 2005

2,148

0

47

Dec 31, 2005

#16

• Dec 31, 2005

• #16

GreenMustangGt said:

i dont think they go backward, also the gear for the speedo, i beleve is white, but it will eventually get chewed up, and the plastic teeth go in to your tranny. I had the same problem, and found out about the plastic bits when i rebuilt my t-5. I took off the tailshaft and put the correct drive/driven gears

Click to expand...

is that bad for the tranny? and by the way when i im fifth and pass 3000rpms. and put it in neutral or hit the clutch, the car shakes. and the shifter really shakes. any ideas why?