• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Getting a Bigger alternator from junkyard,which one to get???

  • Thread starter Thread starter Jay5_o
  • Start date Start date Jul 24, 2004

Jay5_o

New Member
Jan 3, 2004
82
0
0
calgary, canada
Jul 24, 2004
#1
  • Jul 24, 2004
  • #1
Im going to be installing a taurus electric fan in my 87 mustang, but with under drive pullies and the factory 70amp alternator isnt just going to cut it.
What alternator will bolt right in and be over 100 amps from the junk yard?
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,029
1,619
194
NJ
Jul 24, 2004
#2
  • Jul 24, 2004
  • #2
94+ mustang, it's a tad bit more than bolt right in, but not much. Search around the internet there's plenty of detailed directions on how to do it. Took me longer to go get the bolt for the top hole than it did to do the install.
 

Jay5_o

New Member
Jan 3, 2004
82
0
0
calgary, canada
Jul 24, 2004
#3
  • Jul 24, 2004
  • #3
would a 85 amp alternator be suffecient to run an electric fan with u/d pullies ?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 24, 2004
#4
  • Jul 24, 2004
  • #4
Electric fan = 3G alternator if you want long life & reliablity from your car.

Figure this:
Ignition system & computer = 12 amps
Fuel pump = 12 amps
Exterior lights = 15 amps
Fan (heater or A/C) = 15 amps (can run between 5-25 amps depending on setting)
Radio & instruments = 10 amps
Wipers = 10 amps

That's grand total of 74 amps from a 65 amp alternator. Talk about overdrawn at the bank!

Here's websites with pictures of the 3G installation...

See http://www.geocities.com/smithmonte/Auto/3G_130A_Alternator_Upgrade.htm - all the tech data you could ever want to know
OR
http://www.mustangcentral.net/tech/alternator.html - excellent pictures of installation

For the right way to do the wiring. Some people will tell you that you can skip the wiring upgrade, but it will catch up with you sooner or later. A fire in the wiring harness is ugly and expensive.
 

Jay5_o

New Member
Jan 3, 2004
82
0
0
calgary, canada
Jul 24, 2004
#5
  • Jul 24, 2004
  • #5
How many amps does an electric fan draw?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 24, 2004
#6
  • Jul 24, 2004
  • #6
Electric fan= 30 amps, up to 50-100 amps startup surge.

The DCControl fan controller would at least ease the starting surge, but without a 3G, you are still left with an electrical system that is underpowered when everything is on. See http://www.dccontrol.com for more info
 

BlackFox5.0

Founding Member
Aug 7, 2000
3,514
1
0
Massachusetts
Jul 24, 2004
#7
  • Jul 24, 2004
  • #7
A friend of mine got one off a 2000 V6, and when we went to put his 87-93 underdrive pulley on it, it wouldn't fit because ford changed the design of the alt.

I got mine for a '94 GT at the parts store, and my underdrive fit on it just fine, I just needed to put one washer on it as it sat a little too deep, but works perfect otherwise....just so you know incase you want to change the pulley....
 
R

redterror302

Founding Member
Jun 29, 2002
895
0
0
Mertztown, PA or State College, PA
Jul 25, 2004
#8
  • Jul 25, 2004
  • #8
Just wondering, what vehicles come with a 3g alt that can swap into a fox? What year/make/model are they? I am going to the junkyard soon, and will most likely not be able to find a 94-up mustang there, so what other alternatives do I have?
 

BlackFox5.0

Founding Member
Aug 7, 2000
3,514
1
0
Massachusetts
Jul 25, 2004
#9
  • Jul 25, 2004
  • #9
I think Taurus's have the 3g. It may look the same, but i don't know exactly how many amps it puts out. Try calling autozone or something, and tell them you need one for a '90's Taurus, I think the 3.8 has the 3g, not sure about the 3.0L. Ask what amperage it is.
 
R

redterror302

Founding Member
Jun 29, 2002
895
0
0
Mertztown, PA or State College, PA
Jul 25, 2004
#10
  • Jul 25, 2004
  • #10
I know I can use an alternator from some years of the taurus, but I don't know which ones. Everyone says to use a taurus alternator, but nobody gives me specific years. Anybody know?
 

BlackFox5.0

Founding Member
Aug 7, 2000
3,514
1
0
Massachusetts
Jul 25, 2004
#11
  • Jul 25, 2004
  • #11
Call a parts tore and find out which one has the right amperage.
 
You must log in or register to reply here.

Similar threads

F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
574
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
Electrical Inaccessible starter solenoid from wire tuck, what are my options for an alternator upgrade?
  • AnthonyA1234
  • Jan 16, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
1K
Fox 5.0 Mustang Tech Feb 8, 2025
Mindseye007
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
733
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
188
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?